User Manual
Table Of Contents
- USER’S GUIDE DCP-7030 DCP-7040
- Compilation and Publication Notice
- Table of Contents
- Section I: General
- 1 General information
- 2 Loading paper and documents
- 3 General setup
- Section II: Copy
- Section III: Software
- Section IV: Appendixes
- A Safety and legal
- B Troubleshooting and routine maintenance
- C Menu and features
- D Specifications
- E Glossary
- Index
- brother ARL/ASA/NZ
Troubleshooting and routine maintenance
61
B
Paper is jammed at the back of the
machine
B
a Open the front cover.
b Slowly take out the drum unit and toner
cartridge assembly.
CAUTION
We recommend that you place the drum
unit and toner cartridge assembly on a
clean, flat surface with a sheet of
disposable paper or cloth underneath it in
case you accidentally spill or scatter toner.
c Open the back cover (back output tray).
d Pull the tabs toward you to open the
fuser cover (1).
e Pull the jammed paper out of the fuser
unit.
f Close the back cover (back output tray).
g Put the drum unit and toner cartridge
assembly back in the machine.
h Close the front cover.
1










