User Manual
Table Of Contents
- USER’S GUIDE DCP-7030 DCP-7040
- Compilation and Publication Notice
- Table of Contents
- Section I: General
- 1 General information
- 2 Loading paper and documents
- 3 General setup
- Section II: Copy
- Section III: Software
- Section IV: Appendixes
- A Safety and legal
- B Troubleshooting and routine maintenance
- C Menu and features
- D Specifications
- E Glossary
- Index
- brother ARL/ASA/NZ
34
A
Choosing a location A
Place your machine on a flat, stable surface that is free of vibration. Put the machine near a
standard, grounded electrical socket. Choose a location where the temperature remains between
10° C and 32.5° C and the humidity is between 20% to 80% (without condensation).
Make sure cables leading to the machine do not constitute a trip hazard.
Avoid placing your machine on the carpet.
Do not place near heaters, air conditioners, water, chemicals or refrigerators.
Do not expose the machine to direct sunlight, excessive heat, moisture or dust.
Do not connect your machine to electrical sockets controlled by wall switches or automatic
timers, or to the same circuit as large appliances that might disrupt the power supply.
Safety and legal A