User Manual
Table Of Contents
- Quick Setup Guide DCP-585CW
- Start Here
- For USB Interface Users (For Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®)
- For USB Interface Users (For Mac OS® X 10.2.4 or greater)
- For Wired Network Interface Users (For Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®)
- For Wired Network Interface Users (For Mac OS® X 10.2.4 or greater)
- For Wireless Network Interface Users
- 10 Before you begin
- 11 Confirm your network environment (Infrastructure Mode)
- Connecting the Brother machine to the wireless network
- Install the Drivers & Software (For Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®)
- Install the Drivers & Software (For Mac OS® X 10.2.4 or greater)
- Install Optional Applications Windows®
- For Network Users
- Consumables
- brother UK/IRE/GEN/SAF
3
g Close the paper tray cover a.
h Slowly push the paper tray completely into the
machine.
i While holding the paper tray in place, pull out
the paper support a until it clicks, and then
unfold the paper support flap b.
3
Connect the power cord
a Connect the power cord.
WARNING
The machine must be fitted with an earthed
plug.
4
Choose your language
a
After connecting the power cord, the LCD shows:
Press a or b to choose your language and
press OK.
b Choose Yes or No and press OK.
1
1
2
Important
DO NOT connect the USB cable yet (if you are
using a USB cable).
Note
The control panel warning LED will stay on until
you have installed the ink cartridges.
If you set the wrong language, you can change
the language after setting the date and time.
(For details, see Changing LCD language in
Chapter 3 of the User’s Guide.)
Select Language
Select Language
Select & Press OK
Deutsch
Nederlands
Italiano
Français
English
English
Select Language
Select & Press OK
No
Yes