User Manual

6
d The LCD asks you if the print quality is OK for
black. Press (Yes) or (No). Then the
machine asks you if the print quality is OK for
color. Press (Yes) or (No).
After pressing (Yes) or (No) for both
black and color, the LCD shows:
e Press (Yes), the machine will then start
cleaning the colors.
f After cleaning is finished, press Color Start.
The machine starts printing the Print Quality
Check Sheet again. Go back to b .
6
Set the LCD contrast
(If needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a Press Menu.
b Press a or b to choose General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose LCD Contrast.
e Press d or c to choose Light, Med or Dark.
Press OK.
f Press Stop/Exit.
7
Set the date and time
Setting the date and time allows the machine to clean
the print head regularly and maintain optimum print
quality. It also allows the machine to name files
created when using the Scan to Media feature.
a Press Menu.
b Press a or b to choose Initial Setup.
Press OK.
c Press a or b to choose Date&Time.
Press OK.
d Press a or b repeatedly to enter the last two
digits of the year, and then press OK.
(e.g. Enter 0 8 for 2008.)
e Repeat for Month and Day, and Hours and
Minutes in 24-hour format.
f Press Stop/Exit.
Note
You can also adjust the angle of the display by
lifting it.
Black OK?
Yes Press
Press
No
Start Cleaning?
Yes Press
Press
No
Date&Time
Year:20
08
MENU Input & Press OK