User Manual
Table Of Contents
- Quick Setup Guide DCP-585CW
- Start Here
- 1 Unpack the machine and check the components
- 2 Load plain A4 paper
- 3 Connect the power cord
- 4 Choose your language (not available for Hong Kong users)
- 5 Install the ink cartridges
- 6 Check the print quality
- 7 Choose your language (For Hong Kong users only)
- 8 Set the LCD contrast (If needed)
- 9 Set the date and time
- 10 Choose your connection type
- For USB Interface Users (For Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®)
- For USB Interface Users (For Mac OS® X 10.2.4 or greater)
- For Wired Network Interface Users (For Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®)
- For Wired Network Interface Users (For Mac OS® X 10.2.4 or greater)
- For Wireless Network Interface Users
- 11 Before you begin
- 12 Confirm your network environment (Infrastructure Mode)
- Connecting the Brother machine to the wireless network
- Install the Drivers & Software (For Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®)
- Install the Drivers & Software (For Mac OS® X 10.2.4 or greater)
- Install Optional Applications Windows®
- For Network Users
- Consumables
- brother ARL/ASA/NZ
- Start Here
43
For Wireless Network Users
Restore the network settings to factory default
To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.
a Make sure the machine is not operating, then disconnect all the cables from the machine (except the power
cord).
b Press Menu.
c Press a or b to choose Network.
Press OK.
d Press a or b to choose Factory Reset.
Press OK.
e Press to choose Yes.
f Press to choose Yes.
g The machine will restart, re-connect cables once this is complete.
Entering Text for Wireless Settings
Press a or b repeatedly to select a character from the list below:
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
(space)!"#$%&'() +,-./:;<=>?@[\]^_`{|}˜
Press d or c repeatedly to move the cursor.
Note
Making corrections
If you entered an incorrect letter and want to change it, press d or c to position the cursor under the incorrect
letter. Use the a and b keys to change to the correct letter, then press c repeatedly to move the cursor back to
the end of the text.