User Manual

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
51
5
Adjusting Brightness,
Contrast and Color 5
Brightness 5
a Press a or b to choose Brightness.
b Press d to make a darker print or press
c to make a lighter print.
Press OK.
c If you do not want to change additional
settings, press Color Start to print.
Contrast 5
You can choose the contrast setting. More
contrast will make an image look sharper and
more vivid.
a Press a or b to choose Contrast.
b Press c to increase the contrast or press
d to decrease the contrast.
Press OK.
c If you do not want to change additional
settings, press Color Start to print.
Color Enhancement (True2Life
®
) 5
You can turn on the color enhancement
(True2Life
®
) feature to print more vivid
images. Printing time will be slower.
a Press a or b to choose True2Life.
Press OK.
b Do one of the following:
 If you want to customize the
White Balance, Sharpness or
Color Density, press d or c to
choose On, and then go to step c.
 If you do not want to customize,
press d or c to choose Off.
Press OK and then go to step f.
c Press a or b to choose
White Balance, Sharpness or
Color Density.
d Press d or c to adjust the degree of the
setting.
Press OK.
e Do one of the following:
 If you want to customize another
color enhancement, press a or b to
choose other option.
 If you want to change another
settings, press a or b to choose
Exit, and then press OK.
f If you do not want to change additional
settings, press Color Start to print.
Note
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will affect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other color. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
• Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Color Density
This setting adjusts the total amount of
color in the image. You can increase or
decrease the amount of color in an image
to improve a washed out or weak picture.