User Manual

Chapter 4
34
Watermark Copy 4
You can place a logo or text into your
document as a Watermark. You can select
one of the template watermarks
(CONFIDENTIAL, DRAFT or COPY), data from
your media cards or USB Flash memory
drive, or scanned data.
Note
Fit to Page, Page Layout,
Ink Save Mode and Book Copy are
not available with Watermark Copy.
Using a template 4
a Load your document.
b Enter the number of copies you want.
c Press a or b to choose
Watermark Copy.
Press OK.
d Press d or c to choose On.
e Press a or b to choose
Current Setting.
Press OK.
f Press a or b to choose Template.
Press OK.
g If you want to change any of the
displayed settings, press a or b to
choose the setting, and then press
d or c to choose the option you want.
h When you are finished changing
settings, press a or b to choose Apply.
Press OK.
i Press Black Start or Color Start.
Using data from a media card or USB
Flash memory drive
4
a Load your document.
b Enter the number of copies you want.
c Press a or b to choose
Watermark Copy.
Press OK.
d Press d or c to choose On.
e Press a or b to choose
Current Setting.
Press OK.
f Press a or b to choose Media. Insert a
media card or USB Flash memory drive.
Press OK.
g Press d or c to choose the data you
want to use for the watermark.
Press OK.
h If you want to change any of the
displayed settings, press a or b to
choose the setting, and then press
d or c to choose the option you want.
i When you are finished changing
settings, press a or b to choose Apply.
Press OK.
j Press Black Start or Color Start.
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while
Photo Capture is blinking to avoid
damaging the card, USB Flash memory
drive or data stored on them.