User`s guide

Troubleshooting and Routine Maintenance
31
The network scanning feature does
not work.
(For Windows
®
users only) The firewall setting on your PC may be rejecting the
necessary network connection. Follow the instructions below to configure the
Firewall. If you are using a personal Firewall software, see the User’s Guide for
your software or contact the software manufacturer.
<Windows
®
XP SP2 users>
1Click the Start button, Control Panel and then Windows Firewall. Make sure
that Windows Firewall on the General tab is set to On.
2Click Advanced tab and Settings button in Network Connection Settings.
3Click Add button, and in the Description of service field,enter any name. In
the Name or IP Address field enter "localhost". In the internal and external
port numbers fields enter 54925 for network scanning. Choose UDP and click
OK. Repeat this step adding Port 137 for Windows
®
.
4 Make sure the new settings are added and the box is checked, and then click
OK.
Your computer cannot find your
machine.
<Windows
®
users>
The firewall setting on you PC may be rejecting the necessary network
connection. For detail, see the instruction above.
<Macintosh
®
users>
Re-select your machine in the DeviceSelector application located in Macintosh
HD/Library/Printers/Brother/Utilities or from the model of ControlCenter2.
Network Difficulties (Continued)
Difficulty Suggestions