User Manual
Table Of Contents
- SOFTWARE USER'S GUIDE
- Table of Contents
- Section I Windows®
- 1 Printing
- 2 Scanning
- 3 ControlCenter3
- 4 Network Scanning (For models with built-in network support)
- 5 Remote Setup (Not available for DCP models and MFC-240C)
- 6 Brother PC-FAX Software (MFC models only)
- PC-FAX sending
- Speed Dial setup
- Brother Address Book
- Setting up a member in the Address Book
- Setting up a group for broadcasting
- Editing member information
- Deleting a member or group
- Exporting the Address Book
- Importing to the Address Book
- Sending a file as a PC-FAX using the Facsimile style user interface
- Sending a file as a PC-FAX using the Simple style user interface
- PC-FAX receiving (Not available for MFC-240C and MFC-3360C)
- 7 PhotoCapture Center™ (Not available for MFC-3360C)
- Section II Apple® Macintosh®
- 8 Printing and Faxing
- 9 Scanning
- 10 ControlCenter2
- 11 Network Scanning (For models with built-in network support)
- 12 Remote Setup & PhotoCapture Center™
- Index
- Brother ENG
Network Scanning (For models with built-in network support)
73
4
Scan to Image 4
When you choose Scan to Image, your document will be scanned and sent directly to the PC you designated
on your network. The ControlCenter3 software will launch the default graphics application on the designated
PC. You can change the Scan configuration. (See Image (example: Microsoft
®
Paint) on page 49.)
a Load your document.
b Press the (Scan) key.
c Press a or b to choose Scan to Image.
Press OK.
d Press a or b to choose the destination PC you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on
the control panel.
Press OK.
e Press Mono Start or Colour Start.
The machine starts the scanning process.
Scan to OCR (Not available for English version) 4
When you choose Scan to OCR, your document will be scanned and sent directly to the PC you designated
on your network. The ControlCenter3 software will launch the Presto!
®
PageManager
®
OCR software and
convert your document into text that can be viewed and edited from a word processing application on the
designated PC. You can change the Scan configuration. (See OCR (Word Processing program) (Not
available for English version) on page 51.)
a Load your document.
b Press the (Scan) key.
c Press a or b to choose Scan to OCR.
Press OK.
d Press a or b to choose the destination PC you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on
the control panel.
Press OK.
e Press Mono Start or Colour Start.
The machine starts the scanning process.