OWNER’S MANUAL DCP-1400
If You Need to Call Customer Service Please complete the following information for future reference: Model Number: DCP-1400 Serial Number*: Date of Purchase: Place of Purchase: * The serial number is on the back of the unit. Retain this manual with your sales receipt as a permanent record of your purchase, in the event of theft, fire or warranty service. ©1996-2001 Brother Industries, Ltd.
Brother Numbers IMPORTANT For technical and operational assistance, you must call the country where you purchased the DCP. Calls must be made from within that country. Brother fax-back system Brother Customer Service has installed an easy-to-use fax-back system, so you can get instant answers to common technical questions and product information for all Brother products. This system is available 24 hours a day, 7 days a week. You can use the system to send faxes to any fax machine.
Ordering Accessories and Supplies IMPORTANT For technical and operational assistance, you must call the country where you purchased the DCP. Calls must be made from within that country. For best quality results use only genuine Brother accessories, available at most Brother retailers. If you cannot find the accessory you need and you have a Visa, MasterCard, Discover or American Express credit card, you can order accessories directly from Brother.
Notice – Disclaimer of Warranties (For USA and Canada) BROTHER’S LICENSOR(S), AND THEIR DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS (COLLECTIVELY BROTHER’S LICENSOR) MAKE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE SOFTWARE.
BROTHER THREE YEAR LIMITED HARDWARE WARRANTY and EXCHANGE SERVICE FOR DCP-1400 (For USA Only) This warranty gives you certain rights and you may also have other rights that may vary from state to state. This warranty is given only to the first enduse purchaser of the accompanying product (referred to in this warranty as “this Product”). What is covered: Brother warrants to you for the Warranty Period that there are no defects in the materials, workmanship or Year 2000 compliance of this Product.
BROTHER THREE YEAR LIMITED HARDWARE WARRANTY and EXCHANGE SERVICE FOR DCP-1400 (For USA Only) Limitations: Repair or replacement as described above is your sole and exclusive (that is, your only) remedy if this Product is defective. Brother is not responsible for damage to or loss of any equipment, media, programs or data related to the use of this Product. Except for that repair or replacement, Brother shall not be liable for any direct, indirect, incidental or consequential damages or specific relief.
BROTHER MULTIFUNCTION CENTER/FACSIMILE MACHINE LIMITED WARRANTY (For Canada Only) Pursuant to this limited warranty of 1 year from the date of purchase for labour and parts, Brother International Corporation (Canada) Ltd. (“Brother”), or its Authorized Service Centers, will repair this DCP/Facsimile machine free of charge if defective in material or workmanship.
Table of Contents 1 2 3 4 Getting to Know Your Digital Copier/Printer ............................. 1-1 Using This Manual ..................................................................... 1-1 Finding Information............................................................ 1-1 Conventions Used in This Manual ...................................... 1-1 DCP-1400 Control Panel Overview........................................... 1-2 Inserting Originals for Copying .........................................
Setting Cassette Usage ........................................................ 4-2 Setting the Print Density...................................................... 4-2 Toner Save........................................................................... 4-2 Sleep Mode .......................................................................... 4-3 5 6 viii Making Copies................................................................................. 5-1 Basic Copy Operations...............................
Page Setup Section.......................................................... 6-5 Font Configuration.......................................................... 6-5 Other Configuration ........................................................ 6-6 Console Configuration Category .................................... 6-6 7 8 Using the Brother DCP as a Printer.............................................. 7-1 Special Printing Features............................................................
Resolution ....................................................................... 8-5 Toner Save ...................................................................... 8-5 Print Setting (For Windows® 95/98/98SE/Me Users Only) ................ 8-6 Duplex Printing (*2)............................................................ 8-6 Manual Duplex................................................................ 8-6 Binding Offset.................................................................
9 Using the Windows®-Based Brother MFL-Pro Control Center ... 9-1 Brother Control Center............................................................... 9-1 AutoLoad the Brother Control Center................................. 9-1 How to Turn Off AutoLoad................................................. 9-2 Using the Scan Keys .................................................................. 9-2 Using the Control Panel Keys .................................................... 9-2 Scan Image ................
10 11 12 xii Using ScanSoft™ PaperPort® for Brother and ScanSoft™ TextBridge® (For Windows® Only) .......................... 10-1 Using ScanSoft™ PaperPort® and TextBridge® ....................... 10-1 Viewing Items in ScanSoft™ PaperPort® for Brother ....... 10-2 Organizing Your Items in Folders ..................................... 10-2 Links to Many Other Applications .................................... 10-3 Using ScanSoft™ TextBridge® OCR (Converting Image Text to Text You Can Edit) ...........
Miscellaneous ............................................................... 12-6 Contrast ......................................................................... 12-6 PreScanning an Image ....................................................... 12-7 13 14 15 Optional Accessories ..................................................................... 13-1 Paper Cassette #2 (Option)....................................................... 13-1 Troubleshooting and Routine Maintenance ........................
Important Safety Instructions ................................................... 15-4 Trademarks............................................................................... 15-6 16 17 18 xiv Glossary........................................................................................... G-1 Specifications ................................................................................... S-1 Product Description.................................................................... S-1 Paper.........
1 Getting to Know Your Digital Copier/Printer 1 Using This Manual Thank you for purchasing a Brother Digital Copier Printer (DCP). This DCP has been designed to be simple to use, with LCD screen prompts to guide you through programming your DCP. However, you can use your DCP to its fullest potential by taking a few minutes to read this manual. Finding Information All chapter headings and subheadings are listed in the Table of Contents.
DCP-1400 Control Panel Overview 6 7 5 8 4 9 1 Stop Press this key to cancel a copy operation. The original will be ejected. 2 (Left Arrow) (Right Arrow) Moves the LCD cursor through text and options. 3 Numeric Keys Use the numeric keys to enter the number of multiple copies (99 maximum). 4 Toner Empty Icon The Toner icon flashes on and off when toner is low, so you’ll know to order another toner cartridge. You will be able to print until the indicator stays on.
9 Copy Keys (Temporary Settings): Clear Settings Resets your temporary copy settings back to the factory default settings. Use this key when you do not want to wait 45 seconds for the temporary settings to clear automatically. B Copy Press this key to start copying an original that is in the ADF or on the scanner glass. Options You can quickly and easily change your temporary settings for each copy. Sort Press this key to sort multiple copies.
Inserting Originals for Copying You can copy from either the ADF (Automatic Document Feeder) or from the scanner glass. Using the ADF (Automatic Document Feeder) The automatic document feeder (ADF) can hold up to 50 pages, feeding each one individually through the machine. Use standard (20 lb/75g/m2) paper when using the ADF. Always fan the pages well and stagger them.
Using the Scanner Glass You can use the scanner glass to copy one page at a time, or pages of a book. Originals can be letter or A4 size. To use the scanner glass, the ADF must be empty. You can make multiple copies; however, if you want them sorted you must use the ADF. Originals are Face Down on the Scanner Glass 1 Lift the document cover. 2 Using the document guidelines on the left, center the original face down on the scanner glass. 3 Close the document cover.
2 Assembly and Connections 2 Packing List Make sure you have the following items: Bi-directional Parallel Cable Drum Unit Assembly (With free Standard Toner Cartridge – up to 3,000 pages) Cable Tie Filter Core For USB Cable CD-ROM Power Cord Owner’s Manual Software License Agreement Paper Cassette Quick Setup Guide Warranty Resistration Accessory Order Form Caution Do NOT throw away the filter cores and cable ties by accident.
Choosing a Location Place your DCP on a flat stable surface, such as a desk. Select a place that is free of vibration and shocks. Place the DCP near a standard, grounded power outlet. Choose a location where the temperature remains between 50°F and 90.5°F (10°–32.5°C). Avoid placing your DCP in a high-traffic area. Do not place near heaters, air conditioners, water, chemicals, or refrigerators. Do not expose the DCP to direct sunlight, excessive heat, moisture, or dust.
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1 Do not use this product near appliances that use water, in a wet basement or near a swimming pool. 2 Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning. Release the Scanner Lock Push the blue Scanner Lock Lever up to unlock the scanner.
Assembly Installing the Drum Unit Assembly (with Toner Cartridge) 1 Unpack the drum unit assembly including the toner cartridge, and gently rock it from side to side five or six times to distribute the toner evenly inside the cartridge. To prevent damage to the drum, do not expose it to light for longer than a few minutes. 2 Open the front cover of the DCP. 3 Insert the drum unit assembly into the DCP. 4 Close the front cover.
Paper Acceptable Paper Paper Type Paper Size Paper Cassette #1: cut sheet Letter, Legal, A4, A5, ISO B5, Executive, A6, ISO B6 Manual Feed Slot: Letter, Legal, A4, A5, B5 (JIS/ISO), Executive, A6, B6 (JIS/ISO) 2.75–8.5 × 4.
Manual Feed Slot Cut Sheet Envelopes Basis Weight: 16 to 43 lb. (60 to 161 g/m2) 20 to 24 lb. (75 to 90 g/m2) Caliper: 0.003 to 0.008 inches. (0.08 to 0.2 mm) 0.003 to 0.005 inches. (0.084 to 0.14 mm) Moisture Content: 4% to 6% by weight 4% to 6% by weight Loading Paper in the Paper Cassette 1 Pull the paper cassette completely out of the DCP. 2 Slide the paper width and length adjusters to the position for the paper size you are using.
3 Fan the paper well. Load paper in the paper cassette. Press down on the paper to flatten it in all four corners, keeping the paper level below the guide. The cassette can hold up to 250 sheets of 20 lb (75g/m2) paper. Maximum Paper Height Guide 4 Slide the paper cassette into the DCP until it locks into place. Manual Feed Slot Use the manual feed slot to print or copy on envelopes, labels, transparencies, card stock or thicker paper: The manual feed slot is above the paper cassette.
Connecting the DCP 1 Connect the power cord. Power Cord WARNING = ■ The DCP must be grounded using a 3-prong plug. ■ Lightning and power surges can damage this product! We recommend that you use a quality surge protection device on the AC power line or unplug the lines during a lightning storm. ■ Do not touch the rollers at the paper exit.
3 On-Screen Programming 3 User-Friendly Programming We have designed your Multi-Function Center with on-screen programming. User-friendly programming helps you take full advantage of all the menu selections your DCP has to offer. Since your programming is done on the LCD, we created step-by-step on-screen prompts to help you program your DCP. All you need to do is follow the prompts as they guide you through the menu selections and programming options.
Menu Selection Table You can probably perform most of these programming settings without the Owner’s Manual. To help you understand the menu selections, options and settings that are found in the DCP programs, use the Menu Selection Table below to change the default settings. Main Menu 1. GENERAL SETUP Menu Selections Options 1. PAPER SIZE Descriptions Selects size of paper for received faxes. LETTER LEGAL Page 4-1 A4 2. BEEPER Adjusts beeper volume. OFF LOW 4-1 HIGH 3. CASSETTE #2 ON OFF 4.
Main Menu 3. PRINTER Menu Selections Options 1. PRINT OPTIONS 1. INTERNAL FONT 2. CONFIGURATION 2. RESET PRINTER — Note Descriptions Page You can print resident fonts to check and confirm font types. 7-7 Printer settings and status are listed here. 7-7 You can restore the printer back to the factory default settings. 7-7 The factory setting (option) is shown in bold. Paper Size Sub Menu Options Factory Setting 1. Cassette #1 LETTER/LEGAL/A4 LETTER 2.
Key Operations Table You can use the keys on the control panel to conveniently choose temporary copy settings and access the scanning operations. The Key Operations Table below will help you understand the options they provide. Press the temporary key repeatedly until you see the option you want, and then press Menu/Set to select it. For the Options key, press or to scroll through the next level of options, and then select the one you want by pressing Menu/Set again.
4 Custom Settings 4 Initial Setup Setting Paper Size You can use three sizes of paper for printing your copies: letter, legal and A4. When you change the size of paper you have loaded in the DCP, you will need to change the setting for the paper size. After you connect the optional Cassette #2, you can select the paper size. 1 Press Menu/Set, 1, 1. 2 If you have the Cassette #2, press 1.PAPER SIZE or to select CASSETTE #1 or CASSETTE #2, and then press Menu/Set. 2.
Setting Cassette Usage The default setting of AUTO allows your DCP to choose the optional Cassette #2 if paper is out in Cassette #1 or if incoming faxes will fit best on the paper in Cassette #2. Choose CASSETTE#1 ONLY, CASSETTE#2 ONLY or CASSETTE USAGE if you want to keep special paper in the other cassette and control when it is used. 1 Press Menu/Set, 1, 1, 3. 2 Press or to select CASSETTE 3.CASSETTE USAGE USAGE, and then press Menu/Set.
Sleep Mode Setting the Sleep Mode reduces power consumption while the DCP is idle. You can choose how long the DCP is idle (from 00 to 99 minutes) before it drops into sleep mode. The timer automatically resets itself after the DCP receives PC data or makes a copy. The default setting is 5 minutes. 1 Press Menu/Set, 1, 6. 2 Use the numeric keys to enter the length 6.SLEEP MODE of time the DCP is idle before it drops into sleep mode (00 to 99 minutes), and then press Menu/Set. 3 Press Stop.
5 Making Copies 5 Basic Copy Operations You can use your DCP as a copier, making up to 99 copies at a time. The DCP can stack the copies or collate (sort) them. Copy Keys The scannable area of your DCP begins at approximately one-sixth inch (4mm) from the edge of the paper. 1/6" (4mm) Not Scannable area 1/6" (4mm) Making a Single Copy (Using the ADF) 1 Place the original face up in the ADF. 2 Press Copy. Do NOT pull on the paper while copying is in progress. COPYING 100% P.
Single or Multiple Copies (Using the Scanner Glass) If you want to sort multiple copies, use the ADF. (See Sorting Multiple Copies (Using the ADF), page 5-5.) 1 Lift the Document Cover. White Film Document Cover Scanner Glass 2 Using the document guide on the left, center the original face down on the scanner glass and close the Document cover. 3 Using the numeric keys, enter the number of copies you want (up to 99). 4 Press Copy .
Temporary Copy Settings You can improve your copies by using the Copy keys: Enlarge/Reduce, Sort, Options, Clear Settings, Special and Copy Mode. These settings are temporary, and the DCP returns to its default settings 45 seconds after it finishes copying. If you want to use these temporary settings again, place the next original in the ADF or on the scanner glass before the 45 seconds expire. Copy Keys Copying Using Multiple Settings You can try different combinations of settings for the best results.
Using Enlarge/Reduce Key AUTO sets the DCP to calculate the ratio that fits the size of your paper. ZOOM allows you to enter a ratio from 25% to 400% in 1% increments. 25% 50% 78% LGL>LTR 94% A4>LTR Press Enlarge/Reduce and or AUTO 100% 104% EXE>LTR 150% 200% 400% ZOOM 1 Place the original face up in the ADF, or face down on the scanner glass. 2 Use the numeric keys to enter the number of copies you want (up to 99). 3 Press Enlarge/Reduce. (Enlargement or reduction ratios appear.
Selecting a Fixed Ratio: Original size is … Paper size is… Recommended ratio is… LETTER LEGAL 100% A4 LETTER 94% LEGAL LETTER 78% Sorting Multiple Copies (Using the ADF) 1 Place the original face up in the ADF. 2 Use the numeric keys to enter the number of copies you want (up to 99). 3 Press Sort. 4 Press Copy. Using the Options Key Use the Options key to temporarily change the copy mode (resolution), contrast and special copy options. See the explanations below the table.
Paper Size Use Paper Size to temporarily identify the size of the paper in the multipurpose sheet feeder. 1 You can select LETTER, LEGAL, A4, EXECUTIVE, A5, B5, A6 and B6 size paper. Press Options and or to select OPT:PAPER SIZE and then press Menu/Set. 2 Press or to select your size of paper, and then press Menu/Set. A6 size original requires using the scanner glass. You can not select A6 size paper in Cassette #2. Paper Type You can use the following types of paper for copying.
Copy Mode (Type of Original) You can select the Copy Mode for your type of original. The default setting is AUTO, which is used for originals that contain both text and photographs. TEXT is used for originals containing only text. PHOTO is used for copying photographs. 1 Place the original face up in the ADF, or face down on the scanner glass. 2 Use the numeric keys to enter the number of copies you want (up to 99). 3 Press Copy Mode continuously to choose the type of original (AUTO, TEXT or PHOTO).
2 in 1 4 in 1 Special Layouts (2 in 1, 4 in 1 or Poster) are not available with Enlarge/Reduce. Poster You can create a poster size copy of a photograph. Poster is not available for multiple copies. Poster copies require using the scanner glass.
Changing Default Copy Settings Press Menu/Set, 2 to change default settings for Copy mode. These settings will remain until you change them again by pressing Menu/Set. Adjust the Copy Mode and Contrast settings. By pressing a number, you can adjust copy settings as shown in the following or to scroll through the options for each setting. Press chart. Press Menu/Set to save your selection. Press Stop—OR—Press next setting you want to change. to select the Press Menu/Set, and 2. 1.
Copy Contrast You can adjust copy contrast to make copies darker or lighter. 1 Press Menu/Set, 2, 2. 2 Press Press 2.CONTRAST to make a copy lighter—OR— to make a copy darker, and then press Menu/Set. 3 Press Stop. Paper Type You can use the following types of paper for copying. For the best print quality, select the type of media that you are most often. THIN (16lb - 18.4lb) - For thin paper PLAIN (18.7lb - 25.3lb) - For ordinary plain paper THICK (25.
6 For DOS Users 6 How to Use the Brother DCP with Your DOS Application Software Before working with your application software that runs on DOS, check that the Brother DCP’s name appears in the printer selection of your application software. If the DCP is not listed, you must install the printer driver that corresponds to HP LaserJet IIP’s emulations. The following table shows combinations of printer drivers and emulation mode.
Installing the Remote Printer Console Before you install the program, make sure you have the following hardware and software to install the program: DOS Version 3.3 or later Monitor EGA/VGA or compatible Option Mouse; the mouse driver must be installed. (You can also operate the program with the keyboard.) Follow these steps to install the remote printer console program: 1 Make sure your Brother DCP is connected to your computer and is set to Online. 2 Start your computer and go to the DOS prompt.
Using the Remote Printer Console Main Program Type C:\RPCX>RPCX, and then press the Enter key to start the Remote Printer Console main program. The Main Screen will appear on your computer screen as shown below.
Remote Printer Console Current Printer Status Information Item Default What This Item Does Media Type Regular Selects the media type “Regular,” “Thin Paper,” “Thick Paper,” “Thicker Paper,” “Bond Paper” or “Transparency.” Paper Feed Paper Cassette Selects the paper feed mode, either “Paper Cassette” or “Manual.” Emulation*1 Laser Jet IIP Selects “Laser Jet IIP.
Page Setup Section Item Default What This Item Does Left Margin *2 Sets the Left Margin value (0-145) columns. Right Margin *2 Sets the Right Margin value (10-155) columns. Top Margin 0.5" Sets the Top Margin 0", 0.33", 0.5", 1", 1.5” or 2". Bottom Margin 0.5" Sets the Bottom Margin 0", 0.33", 0.5", 1", 1.5" or 2". Line / Page *2 Sets the lines/pages (5-128). Xoffset 0 Sets the Xoffset (vertical) value from 0 to 500 dots.
Other Configuration Item Default What This Item Does Auto LF Off Selects Auto LF “On or Off” Auto CR Off Selects Auto CR “On or Off” Auto Wrap Off Selects Auto Wrap “On or Off” Auto Skip On Selects Auto Skip “On or Off” Console Configuration Category File Function Environment Sets the Buzzer on/off, Color for Remote Print Console For more information on RPC, see the Help Information in the program.
7 Using the Brother DCP as a Printer 7 Special Printing Features Windows® Printing The dedicated printer driver and TrueType™ compatible fonts for Microsoft® Windows® 95/98/98SE/Me and NT®4.0/2000 Professional are available on the CD-ROM supplied with your DCP. You can install them easily into your Windows® system using our installer program.
Printing From Your PC Multi-purpose Paper Cassette The DCP’s multi-purpose paper cassette can be adjusted to feed many sizes of paper: letter, legal, A4, A5, B5, A6, B6 and executive plain paper. When the DCP receives print data from your computer, it loads paper from the paper cassette. Insert the sheet of paper with the side you wish to print on face down in the paper cassette. ■ Select the print command from your PC. Your PC sends a print command and data to the DCP.
Caution When you use manual duplexing, it is possible that a paper jam may occur or the print quality might not be satisfactory. (See Paper is Jammed in the Paper Cassette, page 14-4.) Front Output Bin The DCP ejects paper with printed surfaces face down into the output bin in the front of the DCP. Unfold the output bin extension to support the printed pages. To prevent the possibility of transparencies smudging as they stack in the output bin, remove each transparency after it exits.
Loading One Sheet of Paper You do not have to choose Manual Feed in the Setup dialog box of your printer driver. Insert the sheet of paper for Portrait (vertical) or Landscape (horizontal), with the side you wish to print on face up in the manual feed slot. 1 Align the paper at the center of the manual feed slot and insert it all the way. 2 Adjust the paper guides to the width of the paper.
Printing on Thicker Paper and Card Stock When the rear cover is lifted up, the DCP has a straight paper path from the manual feed slot to the rear of the printer. Use this paper feed and output method when you want to print on envelope, thicker paper or card stock. 1 Select manual feed mode in the printer driver. 2 Send the print data as usual. 3 Lift up the rear cover at the rear of the DCP. 4 Adjust the manual feed paper guides to the width of the paper you are using.
Simultaneous Operation Your DCP can print data from your computer while scanning information into the computer. However, when the DCP is copying on paper, it pauses the PC printing operation, and resumes when copying is complete. (See Acceptable Paper, page 2-5.) Choosing Acceptable Paper We recommend that you test paper (especially special sizes and types of paper) on the DCP before purchasing large quantities. ■ Avoid feeding labels with carrier sheets exposed, or your DCP will be damaged.
Printer Operation Key Reset Key You can clear data from the memory. Printing the Internal Font List You can print a list of the DCP’s internal (or resident) fonts to see how each font looks before you select it. 1 Press Menu/Set, 3, 1, 1. 2 Press Copy. The DCP prints the list. 3 Press Stop. 1.INTERNAL FONT Printing the Print Configuration List You can print a list of current printer settings. 2.CONFIGURATION 1 Press Menu/Set, 3, 1, 2. 2 Press Copy. The DCP prints the settings. 3 Press Stop.
8 Printer Driver Settings 8 (For Windows® Only) Using the Brother DCP-1400 Printer Driver A Printer Driver is software that translates data from the format used by a computer into the format required by a particular printer, using a printer command language or page description language. The printer drivers are on the supplied CD-ROM. The latest printer driver can be downloaded from the Brother Solutions Center at http://solutions.brother.
Basic Tab *1 *2 *3 *1 Select the Paper size, Multiple Page and Orientation. *2 Select number of Copies and Media Type. *3 Select Paper Source, First Page and Other Pages.
Paper Size From the drop-down box select the Paper Size you are using. Multiple Page The Multiple Page selection can reduce the image size of a page allowing multiple pages to be printed on one sheet of paper or enlarging the image size for printing on page on multiple sheets of paper. Ex. 4 in 1 Ex. 1 in 2 × 2 pages Border Line When printing multiple pages on one sheet with the Multiple Page feature you can select to have a solid border, dash border or no border around each page on the sheet.
Collate The collate selection is active if more than one copy is selected. With the collate check box selected, one complete copy of your document will be printed and then repeated for the number of copies you selected. If the collate check box is not selected then each page will be printed for all the copies selected before the next page in the document is printed. Collate box checked Collate box not checked Media Type ■ ■ ■ ■ ■ ■ You can use the following types of media in your printer.
Advanced Tab *2 *3 *4 *5 *1 Change the tab settings by selecting one of the following icons: *1 *2 *3 *4 *5 Print Quality Duplex Printing Watermark Page Setting Device Option Print Quality (*1) Resolution You can change the resolution as follows: • 300 dpi • 600 dpi Toner Save You can save running costs by turning on the Toner Save Mode, which reduces the print density.
Print Setting (For Windows® 95/98/98SE/Me Users Only) Print Setting is used for optimizing your print quality for the type of document being printed (Photos, Graphics or Scanned Images). When you choose Auto (Recommended), the printer automatically prints with the most suitable print settings. With the Print Setting set to Manual, you can change the Brightness, Contrast and Graphics Quality options manually.
Watermark (*3) You can place a logo or text into your document as a Watermark by using a bitmap file as your source file or select one of the preset Watermarks. Print Watermark ■ ■ ■ ■ The Print Watermark feature offers printing choices of: On all pages On first page only From second page Custom In Background With the In background feature checked the Watermark will print behind your document on the page. If this feature is not checked then the Watermark will print on top of your document.
You can change the size and the position of the Watermark on the page by selecting the Watermark and clicking the Edit button. If you want to add a new Watermark, click the New button and select Text or Bitmap from the Watermark Style. Watermark Text Enter your Watermark text into the Text Box and select the Font, Size, Darkness and Style. Watermark Bitmap Enter the file name and location of your bitmap image in the File box or Browse for the file location. You can also set the scaling size of the image.
Page Setting (*4) You can change the print size of your document with the Scaling feature. 1 Check Off if you want to print the document as it appears on your screen. 2 Check Fit to Paper Size, if your document has an unusual size, or if you have only the standard size paper. 3 Check the Free box if you want to reduce or enlarge the output. You can use the Mirror or Reverse Print feature for your page setting.
Device Options (*5) Set one of the following Printer Functions: ■ Quick Print Setup ■ Administrator (For Windows® 95/98/98SE/Me Users Only) ■ Print Date & Time PRINTER DRIVER SETTINGS (FOR WINDOWS® ONLY) 8 - 10
Quick Print Setup The Quick Print Setup feature allows you to quickly select driver settings. To view setting, simply click your mouse button on the task tray icon. This feature can be set to ON or OFF from the Device Options section. Administrator (For Windows® 95/98/98SE/Me Users Only) The administrator selection permits the Copy, Scaling and Watermark features to be locked and password protected. Note 8 - 11 Record your password and keep it in a safe place for future reference.
Print Date & Time When enabled the Print Date and Time feature automatically will print the date and time from your computers system clock on your document. Click the Setting button to change the Date and Time Format, Position and Font. To include a background with the Date and Time select Opaque. When Opaque is selected you can set the Darkness of the Date and Time background by changing the percentage. Note The Date and Time indicated in the selection box represents the format that will be printed.
Accessories Tab The Accessories Tab includes the settings for configuring the printer driver for the size of paper loaded in each paper source. This tab also installs any additional options into the driver settings. Paper Source Setting To configure the paper size for each paper source, highlight the source from the Paper Source Setting list. Select the Paper Size from the pull-down box and click Update. (The Paper Source Setting is used when selecting Auto Select in the Basic Tab.
Support The Support Tab provides driver version information and setting information. In addition there are links to the Brother Solution Center and Driver Update Web sites. Brother Solutions Center The Brother Solutions Center is a Web site offering information about your Brother product including FAQ’s, User Guides, Driver updates and Tips for using your machine. Web Update Web Update checks the brother web site for updated drivers and automatically downloads and updates the driver on your computer.
Features in the Printer Driver (For Windows® 2000) The Windows® 2000 Professional printer driver utilizes Microsoft’s uni-driver architecture. The following section describes the driver features and selections available for Windows® 2000. General Tab Printing Preferences In the General tab, click the Printing Preferences... button to access the Layout tab.
Layout Tab *1 *2 *1 Orientation Select the Orientation, which is how your document will be positioned on the paper (Portrait or Landscape).
*2 Pages Per Sheet You can select 1, 2, 4, 6, 9 or 16 pages to be printed on one sheet of paper. The image of each page will be reduced as needed to fit the paper. 2 in 1 4 in 1 Paper/Quality Tab *1 *2 *1 Paper Source Possible paper sources are: Automatically Select, Auto, Upper Paper Tray, Lower Paper Tray (optional cassette #2) and Manual Feed Slot. When “Automatically Select” is chosen, the DCP automatically will choose the cassette with the appropriate size of paper.
*2 Media For the best print quality, select the type of media you are using: ■ Regular ■ Thick Paper ■ Thicker Paper ■ Transparency When using ordinary plain paper, select Regular. When using heavier weight paper, envelopes, or rough paper, select Thick Paper or Thicker Paper. For OHP transparencies, select Transparency. Advanced Options Click the Advanced...
*2 Graphic Print Quality – You can change the resolution as follows: ■ 600 × 600 dots per inch ■ 300 × 300 dots per inch *3 Document Options Advanced Printing Features – You can Enable or Disable Advanced Printing Features from this selection. If you disable it, Page Order, Pages Per Sheet, Copy and Collate will be disabled. Halftoning – This selection is for changing the dither pattern to achieve the best print results when printing graphics.
Device Settings Tab Form To Tray Assignment – This selection assigns the paper size to each paper source. For auto paper selection (Automatically Select) to work properly, the paper size set for each source must match the actual size of paper loaded. The available options are: ■ A4 ■ A5 ■ B5 (JIS) ■ Executive ■ Legal ■ Letter Installable Options Lower Tray – If an optional lower tray is installed, this selection must be set to ON to enable access to the lower tray.
9 Using the Windows®-Based Brother MFL-Pro Control Center 9 Brother Control Center The Brother Control Center is a software utility that pops up on the PC screen whenever paper is placed in the automatic document feeder (ADF). This allows you to quite easily, with very few mouse clicks, access the most frequently used scanning applications. Using the Control Center eliminates the need to manually launch the specific applications.
How to Turn Off AutoLoad 1 Left-click the Control Center icon, and then click Show. 2 When the Control Center icon appears, left-click the Smart Click Control Center button. A dialogue box with a check box labeled “AutoLoad Pop-up” will appear: 3 Uncheck the AutoLoad Pop-Up option. Using the Scan Keys You can use the Scan keys on the control panel to scan originals into your word processing, graphics or E-mail applications.
Scan Image You can scan a picture into your graphics application for viewing and editing. 1 Place your original face up in the ADF, or face down on the scanner glass. 2 Press Scan Image. The DCP will scan the original and send a color image to your graphics application. Scan/OCR If your original is text, you can have it automatically converted by ScanSoft™ TextBridge® to an editable text file and then displayed in your word processing application for further editing.
Brother Control Center Features Auto Configuration During the installation process the Control Center checks your system to determine the default applications for E-mail, word processing and graphics viewer/editor. For example, if you are using Outlook as your default E-mail application, the Control Center automatically will create a link and a scanning application button for Outlook.
Copy Operations Copy—allows you to use the PC and any Windows® printer driver for enhanced copy functions. You can scan the page on the Brother DCP and print the copies using any of the features of the Brother DCP printer driver—OR—you can direct the copy output to any standard Windows® printer driver installed on the PC. Scanner Settings for Scan and Copy When the Pop-Up screen is displayed, you can access the Scanner Settings window.
Setting Up the Scanner Configurations The Pop-Up application stores eight different scanning modes. Each time you scan an original, you will choose the most appropriate scanning mode from the following: Faxing, Filing and Copying Text for OCR Photos Photos (High Quality) Photos (Quick Scan) Custom Draft Copy Fine Copy Each mode has its own set of stored settings. You can keep the factory default settings or change them at any time: Resolution—Select the scanning resolution you most frequently use.
Scan to File Scanner Settings From the pull-down list, select the scanning mode that is appropriate for the type of file: Faxing, Filing and Copying; Text for OCR; Photos; Photos (High Quality); Photos (Quick Scan); Custom; Draft Copy or Fine Copy. To change any of the settings for that mode, click the Modify Settings… button.
Destination Folder PaperPort Folder—Select this checkbox to scan the original into your PaperPort folder. Other Folder—Select this checkbox, to scan the original as another file type and/or into another directory/folder. File—If you selected Other Folder, from the pull-down list select the type of file: PaperPort Files (*.MAX) Self Viewing Files (*.EXE) PaperPort 5.0 Files (*.MAX) PaperPort 4.0 Files (*.MAX) PaperPort 3.0 Files (*.MAX) Windows Bitmap (*.BMP) PC Paintbrush (*.PCX) Multi-page PCX (*.
Scanner Settings From the pull-down list, select the scanning mode that is appropriate for the type of file: Faxing, Filing and Copying; Text for OCR; Photos; Photos (High Quality); Photos (Quick Scan); Custom; Draft Copy or Fine Copy. To change any of the settings for that mode, click the Modify Settings… button. E-mail Application E-mail Package—From the pull-down list, select your E-mail application. E-mail Settings—Click the EMail Settings… button to set up links.
Conversion Options Format Combine all files into one file when possible—Click this checkbox to combine all files of the same type into one file. (For Brother Color Models Only) Convert non-image files to color—Click this checkbox to convert all files that have been processed through OCR to color. Show QuickSend Menu Click this checkbox if you want the Select QuickSend Recipient window to be displayed when you choose Scan to E-mail.
Scan to Word Processor Scanner Settings From the pull-down list, select the scanning mode that is appropriate for the type of file: Faxing, Filing and Copying; Text for OCR; Photos; Photos (High Quality); Photos (Quick Scan); Custom; Draft Copy or Fine Copy. To change any of the settings for that mode, click the Modify Settings… button.
Word Processor Word Processor—From the pull-down list, select the word processor you want to use. Click the Link Settings… button to display a screen to set up a link to the version of OCR and document format that you want to use: OCR Package—From the pull-down list, select TextBridge Classic OCR if you want to use the OCR package that was installed with the Brother software. Click the OCR Settings… button to choose how the OCR application will read the pages you scan into your word processor application.
User-Defined Button Scanner Settings From the pull-down list, select the scanning mode that is appropriate for the type of file: Faxing, Filing and Copying; Text for OCR; Photos; Photos (High Quality); Photos (Quick Scan); Custom; Draft Copy or Fine Copy. To change any of the settings for that mode, click the Modify Settings… button. Target Application Application—From the pull-down list, select the application you want to add to this Pop-Up screen.
Copy Scanner Settings From the pull-down list, select the scanning mode that is appropriate for the type of file: Faxing, Filing and Copying; Text for OCR; Photos; Photos (High Quality); Photos (Quick Scan); Custom; Draft Copy or Fine Copy. To change any of the settings for that mode, click the Modify Settings... button. Copy Settings Brother DCP-1400 Copies—Enter the number of copies you want to print. To change the copy options, click the Copy Options... button.
10 Using ScanSoft™ PaperPort® for Brother and ScanSoft™ TextBridge® (For Windows® Only) 10 Using ScanSoft™ PaperPort® and TextBridge® ScanSoft™ Paper Port® for Brother is a document management application. You will use PaperPort® to view incoming faxes and scanned documents. PaperPort® has a sophisticated, yet easy-to-use, filing system that will help you organize your documents. It allows you to combine or “stack” documents of different formats for printing, faxing or filing.
Viewing Items in ScanSoft™ PaperPort® for Brother PaperPort® provides several ways to view items: Desktop View displays a thumbnail, a small graphic that represents each item in a Desktop or folder. Items in the selected folder appear on the PaperPort® Desktop. You can see PaperPort® items (MAX files) and non-PaperPort® items (files created using other applications).
Links to Many Other Applications PaperPort® automatically recognizes many other applications on your computer and creates a “working link” to them. The Link Bar at the bottom of Desktop view shows icons of those linked applications. To use a link, drag an item onto one of the icons to start the application represented by the icon. A typical use of the Link Bar is to select an item and then fax it. This sample Link Bar shows several applications with links to PaperPort®.
Exporting Items in Other Formats You can export or save PaperPort® items in several popular file formats. For Windows® 95/98/98SE, and Windows NT® Workstation Version 4.0, Windows® 2000 Professional and Windows® ME, you can export formats BMP, PCX, DCX, JPG, TIF, PDF, PNG, FPX, HFX, or self-viewing. For Windows® 3.1x, you can export file formats BMP, PCX, DCX, JPG, TIF, PDF, HFX and GIF. For example, you could create a file for an Internet Web site and export it as a JPEG file.
Scanning an Image into Your PC 1 Insert document(s) face up in the ADF, or face down on the scanner glass. 2 Adjust the following settings, if needed, in the Scanner Setup window: ■ Resolution ■ Scan Type (Black & White, Gray [Error Diffusion], True Gray, 256 color, 24 bit color, 24 bit color (Fast)) ■ Brightness ■ Contrast ■ Size 3 Select the Start button from the Scanner window. When scanning is completed, close the scanner window.
If the scanned image is too light, set a lower brightness value and scan the document again. If the image is too dark, set a higher brightness value and scan the document again. Contrast The contrast setting is adjustable only when you have selected one of the gray scale settings, but it is not available when Black & White is selected as the gray Scale.
PreScanning an Image PreScanning allows you to scan an image quickly at a low resolution. A thumbnail version of the image will appear in the Scanning Area. This is only a preview of the image so you can see how it will look. The PreScan button is used to preview an image for cropping any unwanted portions from the image. When you are satisfied with the preview, select the Start button to scan the image. 1 Insert document face up in the ADF, or face down on the scanner glass.
11 Using Automatic E-Mail Printing 11 For Windows® 95, 98, 98SE, Me Only Main Features ■ You can use Automatic E-Mail Printing with other E-mail software: Brother Automatic E-Mail Printing has some extra operations that other E-mail software, such as Netscape Navigator™ or MS Internet Mail, do not support.
12 Using the Brother DCP with a New Power Macintosh® G3, G4 or iMac™/iBook 12 Set up Your USB Equipped Apple® Macintosh® G3,G4, iMac™ or iBook with Mac OS 8.5/8.51/8.6/9.0/9.0.4/9.1 Note Before you can connect the DCP to your Macintosh®, you must purchase a USB cable that is no longer than 6 feet (1.8 meters). To work with your DCP your USB Equipped Apple® Macintosh® must be set up with Mac OS 8.5/8.51/8.6/9.0/9.0.4/9.1 (The Brother Scanner Driver works only with Mac OS 8.6/9.0/9.0.4/9.
To print the document: 3 From your Macintosh scanning application software such as Simple Text, click File menu and select Page Setup. You can change the settings for Paper Size, Orientation and Scaling, and then click OK. 4 From your Macintosh scanning application software such as Simple Text, click File menu and select Print. Click Print to start printing. Note If you want to change Copies, Pages, Resolution, Paper Source and Media Type, select your settings before clicking Print.
Using Brother TWAIN Scanner Driver with Your Apple® Macintosh® The Brother DCP software includes a TWAIN Scanner driver for Macintosh®. This Macintosh® TWAIN Scanner driver can be used with application that supports the TWAIN specification. You can use PaperPort® for scanning.
Accessing the Scanner Run your PaperPort® software. You will see the PaperPort® icon in the upper right corner of your screen. The first time you use the Brother TWAIN driver, set it as the default by choosing the Select Source, and then click the PaperPort® icon. Afterward, for each original you scan, choose Acquire Image by clicking the PaperPort® icon. The Scanner setup dialog box will appear. Scanning a Document into Your Macintosh G3, G4 or iMac 1 Place the original in the ADF.
Settings in the Scanner Window Image Resolution Choose the scanning resolution from the Resolution pop-up menu. Higher resolutions take more memory and transfer time, but can achieve a finer scanned image. (Each model has different resolutions. See Specification.) Scanning Area Set the Size to one of the following: ■ Letter (8.5 × 11 inches) ■ A4 (210 × 297 mm) ■ Legal (8.5 × 14 inches) ■ A5 (148 × 210 mm) ■ B5 (182 × 257 mm) ■ Executive (7.25 × 10.
Business Card Size To scan business cards, select the Business Card size setting (90 × 60 mm) and place the business card at the top center of a carrier sheet. Carrier sheets are available from your Dealer. When scanning photographs or other images for use in a word processor or other graphics application, it is a good idea to try different settings for the contrast, mode and resolution to determine which settings look best. Miscellaneous Brightness Adjust the brightness settings to obtain the best image.
PreScanning an Image PreScanning allows you to scan an image quickly at a low resolution. A thumbnail version will appear in the Scanning Area. This is only a preview of the image, so you can see how it will look. The PreScan button is used to preview an image for cropping any unwanted portions from the image. When you are satisfied with the preview, click Start to scan the image. 1 Insert the original face up in the ADF. 2 Click PreScan.
13 Optional Accessories 13 Paper Cassette #2 (Option) You can purchase the Paper Cassette #2 accessory (LT400) to use as a third paper source. Cassette #2 holds up to 250 sheets of 20 lb. (75 g/m2) paper. Paper Cassette #2: Holds approx. 250 sheets of 20 lb. (75 g/m2) Letter/A4 paper Basis Weight: 16 to 28 lb. (60 to 105 g/m2) Caliper: 0.003 to 0.005 inches. (0.08 to 0.
14 Troubleshooting and Routine Maintenance 14 Troubleshooting IMPORTANT For technical and operational assistance, you must call the country where you purchased the printer. Calls must be made from within that country. Error Messages As with any sophisticated office product, errors may sometimes occur. If this happens, your DCP often identifies the problem and displays an error message. The table below explains the most common error messages. You can correct most problems by yourself.
Error Messages Error Message Cause Action COVER OPEN PLS CLOSE COVER The front cover was not completely closed. Close the front cover for the drum unit. CHECK ORIGINAL Originals were not inserted or fed properly, or original scanned from ADF was longer than about 40 inches (90cm). See Original Jams and Paper Jams, page 14-3. MACHINE ERROR XX DCP has a mechanical problem.
Original Jams and Paper Jams Based upon where the original or printed sheet is jammed, follow the appropriate set of instructions to remove it. Original is Jammed in the top of the ADF Unit 1 Remove any paper from the ADF that is not jammed. 2 Lift the ADF cover. 3 Pull the jammed original out to the left. 4 Close the ADF cover. 5 Press Stop. ADF Cover Original is Jammed inside the ADF Unit 1 Lift the document cover. 2 Remove any paper from the ADF that is not jammed. 3 Lift the ADF unit.
Paper Jam Before you can clear a paper jam error, you must find out where the paper is stuck. See the following three types of paper jams. WARNING Do not use force to pull the jammed paper from the paper tray because you may damage the DCP and cause toner to scatter on the next printed pages. After you use the DCP, some internal parts are extremely HOT! When you open the front, never touch the shaded parts shown in the following diagram.
Paper is Jammed near the Drum Unit 1 Open the front cover. 2 Remove the drum unit but do not force it if it cannot be removed easily. Instead, pull the edge of the jammed paper from the paper cassette. 3 Gently pull out the jammed paper. 4 Reinstall the drum unit. 5 Close the front cover. Paper is Jammed in the Fuser Unit 1 Open the rear cover. 2 Pull out the jammed paper.
If You Are Having Difficulty with Your DCP If you think there is a problem with your DCP, make a copy first. If the copy looks good, the problem is probably not your DCP. Check the chart below and follow the troubleshooting tips. DIFFICULTY SUGGESTIONS Copy Quality Difficulties Vertical streaks appear in copies. Sometimes you may see vertical streaks on your copies. Either the scanner or the primary corona wire for printing is dirty. Clean them both. (See pages 14-14 and 14-16.
DIFFICULTY SUGGESTIONS You see the “New Hardware Found” message on your PC screen (although you have already installed the drivers in Windows 95). Click on “Do not install a driver. (Windows will not prompt you again)” and click “OK”. You see the “Update Device Driver Wizard” or “Add New Hardware Wizard” message on your PC screen (although you have already installed the drivers in Windows 95 or 98). Follow the instructions from the installer, then click “Next”.
DIFFICULTY SUGGESTIONS DOS Setup Printing Difficulties I cannot print from my application software. Check that the DOS application software interface settings match those of your printer. For example, if you are using a parallel printer cable, you would probably set your DOS software printer port to LPT1. Check for an error message on the LCD. The DCP prints, but it prints incorrect information. Sometimes it prints a couple of characters and then ejects the pages.
DIFFICULTY SUGGESTIONS Print Quality Difficulties Printed pages are curled. Thin Paper (17lb-18.4lb) can cause this problem. Make sure you select the Paper Type that suits the paper in your multipurpose sheet feeder. (See Paper Type, page 5-6 and 5-10 and Media Type, page 8-4.) Printed pages are smeared. Rough surfaces or thick media can cause “smeared pages” —OR—“the toner to smear.” Make sure you select the Paper Type that suits the paper in your multi-purpose sheet feeder.
DIFFICULTY SUGGESTIONS The whole page is printed black. Clean the DCP’s interior and the primary corona wire of the drum unit. (See page 14-16.) Also, do not use heat sensitive paper as it will cause this problem. After cleaning, if the printed pages are still black or the LCD shows CHANGE DRUM SOON, replace the drum unit with a new one. The drum unit may be damaged. Black Page Nothing printed on the page. Make sure that the toner cartridge is not empty.
Packing and Shipping the DCP Whenever you transport the DCP, use the packing materials that came with your DCP. If you do not pack the DCP correctly, you could void your warranty. 1 Unplug the DCP from the AC outlet. WARNING Do not unplug the DCP after a print job until you hear the final click. 2 Plug the DCP into the AC outlet again. And leave it for 5 seconds. Lock the Scanner Lock 3 Push the blue Scanner Lock Lever up to lock the scanner.
4 Open the front cover. 5 Remove the drum unit. Caution Remove the drum unit and toner cartridge assembly. Leave the toner cartridge installed in the drum unit. 6 Place the drum unit and toner cartridge assembly into the plastic bag and seal the bag. 7 Close the front cover. Fold down the front output bin extension. 8 Wrap the DCP in the plastic bag and place it in the original carton box with the original packing material.
9 Pack the drum unit, toner cartridge assembly parallel cable, AC cord and printed materials in the original carton as shown below: Note If you are returning the DCP to Brother as part of the Exchange Service, pack only the DCP. Keep all separate parts to use with your “Exchange” machine. 10 Close the carton and tape it shut.
Routine Maintenance Cleaning the Scanner Unplug the DCP and lift the document cover. Clean the scanner glass and the white film with isopropyl alcohol on a lint free cloth. White Film Document Cover Lift the ADF unit. Clean the white roller and the glass strip under the roller with isopropyl alcohol on a lint-free cloth.
Cleaning the Printer Caution ■ Do not use isopropyl alcohol to remove dirt from the control panel. It may crack the panel. ■ Do not use isopropyl alcohol to clean the scanner window or toner sensor. ■ Do not touch the scanner window with your finger. ■ The drum unit contains toner, so handle it carefully. If toner scatters and your hands or clothes get dirty, immediately wipe it off or wash it with cold water. 1 Open the front cover. 2 Remove the drum unit assembly.
Cleaning the Drum Unit We recommend placing the drum unit on a drop cloth or large disposable paper to avoid spilling and scattering toner. 1 Clean the primary corona wire inside the drum unit by gently sliding the tab from right to left several times. 2 Return the tab and snap it into the Home position ( ). Corona Wire Tab Home Position ( ) Caution If the tab is not at Home position ( ), printed pages may have vertical stripes. 3 Reinstall the drum unit into the DCP.
How to Replace the Toner Cartridge WARNING Just after you use the DCP, some internal parts of the DCP will be extremely HOT! So, never touch the shaded parts shown in the illustration. Front view 1 Open the front cover and pull out the drum unit. Place the drum unit on a drop cloth or large piece of disposable paper to avoid spilling and scattering the toner. 2 Hold down the lock lever on the right and pull the toner cartridge out of the drum unit assembly.
Caution ■ Wait to unpack the toner cartridge until immediately before you install it in the DCP. If a toner cartridge is left unpacked for a long period of time, the toner life is shortened. ■ You can use only a genuine Brother toner cartridge (TN-430 or TN-460), which is specially formulated to ensure top print quality. Using another brand of toner cartridge may void your DCP’s warranty.
8 Reinstall the drum unit and close the front cover. Replacing the Drum Unit The DCP uses a drum unit to create print images on paper. If the LCD shows CHANGE DRUM SOON, the drum unit is near the end of its life and it is time to purchase a new one. Even if the LCD shows CHANGE DRUM SOON, you may be able to continue printing without having to replace the drum unit for a while.
Follow these steps to replace the drum unit: 1 Open the front cover. 2 Remove the old drum unit. Place the drum unit on a drop cloth or disposable paper to avoid scattering toner. 3 Hold down the lock lever on the right and pull the toner cartridge out of the drum unit assembly. (See Replacing the Toner Cartridge, page 14-16.) Lock Lever Discard the used drum unit according to local regulations. If you are not sure of them, call your local Sanitation Department.
15 Important Information 15 Regulations and warnings These notices are in effect on models sold and used in the United States only. If you experience trouble with DCP-1400, please contact a Brother Authorized Service Center for information on service or repair. If you are not able to solve a problem with your multi-function center, contact Brother Customer Service. (See Brother Numbers, page i.
WARNING Use of controls, adjustments or performance of procedures other than those specified in this maanual may result in hazardous invisible radiation exposure. Caution Changes or modifications not expressly approved by Brother Industries, Ltd. may void the user’s authority to operate the equipment. Internal laser radiation Max. Radiation Power Wave Length Laser Class 5 mW 760 - 810 nm Class IIIb (Accordance with 21 CFR Part 1040.
Important Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user’s authority to operate the equipment. Industry Canada Compliance Statement (For Canada Only) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Important – About the Interface Cable A shielded interface cable should be used to ensure compliance with the limits for a Class B digital device.
Important Safety Instructions 1 2 3 4 Read all of these instructions. Save them for later reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 5 Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 6 Slots and openings in the cabinet and the back or bottom are provided for ventilation.
14 Unplug this product from the wall outlet and refer servicing to a Brother Authorized Service Center under the following conditions: A When the power cord is damaged or frayed. B If liquid has been spilled into the product. C If the product has been exposed to rain or water. D If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions.
Trademarks Brother is a registered trademark of Brother Industries, Ltd. The Brother logo is a registered trademark of Brother Industries, Ltd. Multi-Function Link is a registered trademark of Brother Industries, Ltd. © Copyright 1996–2001 Brother Industries, Ltd. All rights reserved. TextBridge and PaperPort are registered trademarks of ScanSoft, Inc. Windows and Windows NT, Microsoft, MS-DOS, Excel and Word are registered trademarks of Microsoft in the U.S. and other countries.
Glossary G ADF (Automatic Document Feeder) Originals can be placed in the ADF and scanned one at a time automatically. Automatic E-Mail Printing Software application that automatically prints incoming e-mail messages on the DCP. (Instructions are on the CD-ROM). beeper volume Volume setting for the beep when you press a key or make an error. Brother Control Center A window that enables you to click on a button to choose the type of scanning operation you want to perform.
S Specifications S Product Description Three performance modes are available for the 3in1 model DCP-1400: Copier, Scanner and Printer. Paper Paper Specifications for the Cassette Cut Sheet Basis Weight: 16 to 28 lb. (60 to 105 g/m2) Caliper: 0.003 to 0.005 inches. (0.08 to 0.13 mm) Moisture Content: 4% to 6% by weight Manual Feed Slot Cut Sheet Envelopes Basis Weight: 16 to 43 lb. (60 to 161 g/m2) 20 to 24 lb. (75 to 90 g/m2) Caliper: 0.003 to 0.008 inches. (0.08 to 0.2 mm) 0.003 to 0.
Consumable Items Toner cartridge Life Expectancy: Up to 6,000 pages/high yield toner cartridges Up to 3,000 pages/standard toner cartridges (when printing letter size or A4 paper at 5% print coverage) Toner life expectancy will vary depending upon the type of average print job. Drum Unit Life Expectancy:up to 20,000 pages There are many factors that determine the actual drum life, such as temperature, humidity, type of paper, toner you use and number of pages per print job.
Printer Emulation Brother Printing System for Windows® and emulation mode of HP LaserJet IIP (PCL level 4) Printer Driver Windows® 95/98/98SE/Me/2000 and Windows NT® Workstation Version 4.0 driver supporting Brother Native Compression mode and bidirectional capability Apple® Macintosh® QuickDraw® Driver for OS 8.5/8.51/8.6/9.0/9.0.4/9.1 Interface Bi-directional parallel (IEEE-1284); USB (Universal Serial Bus) 1.
Computer Requirements Minimum System Requirements Computer Platform & Operating System Version 95, 98, 98SE Pentium 75MHz Me Pentium 150MHz NT Workstation 4.0 Pentium 75MHz 2000 Professional Pentium 133MHz XP* Pentium 233MHz ® Windows Operating Systems Processor Minimum Recommended Available Hard Minimum Speed RAM RAM Disk Space ® 24MB 32MB 32MB 64MB 50MB 64MB 128MB OS 8.5 – 8.51 (Printing Only) Apple iMacTM/iBookTM/ G3/G4 Operating Systems OS 8.6 – 9.
Parallel Interface Interface Connector Printer Side: Amphenol FCN-685J036-L/X or equivalent A shielded cable should be used. Pin Assignment Pin No. Signal Direction Pin No. Signal Direction 1 DATA STROBE Input 19 0V(S.G.) - 2 DATA 1 Input 20 0V(S.G.) - 3 DATA 2 Input 21 0V(S.G.) - 4 DATA 3 Input 22 0V(S.G.) - 5 DATA 4 Input 23 0V(S.G.) - 6 DATA 5 Input 24 0V(S.G.) - 7 DATA 6 Input 25 0V(S.G.) - 8 DATA 7 Input 26 0V(S.G.) - 9 DATA 8 Input 27 0V(S.G.
Resident Fonts The following bitmapped fonts are resident in the DCP. Brougham 10 (12 point) upright/normal Brougham 12 (10 point) upright/normal Letter Gothic 16.66 (8.5 point) upright/normal (Portrait and Landscape are available for the above.
The following table shows characters available only in the corresponding character set. The numbers at the top of the table are code values with which characters are to be replaced in the Roman 8 character set. For other characters, see character set of Roman 8.
Index A accessories and supplies ii assembly and connections 2-4 drum unit assembly 2-4 loading paper 2-6 power cord and 3-prong plug 2-8 scanner lock 2-3 B Brother accessories and supplies ii Customer Service i fax-back system i Frequently Asked Questions (FAQs) i product support i warranties Canada vi Notice-Disclaimer of Warranties iii USA iv Brother Control Center using and configurating 9-1 to 9-14 C cleaning (routine maintenance) drum unit 14-16 printer 14-15 scanner 14-14 computer requirements S-4
L LCD (Liquid Crystal Display) 3-1 M ® Macintosh G3, G4 or iMac™ 12-1 maintenance, routine 14-1, 14-14 manual feed slot 2-5, 2-7 multi-purpose sheet feeder 2-5, 2-6 O OCR (ScanSoft™ TextBridge®) 10-1 Options key 5-5 P packing list 2-1 paper jams 14-4 loading 2-6 size and specifications 2-5, 4-1 printing 7-1 density 4-2 difficulties 14-6 to 14-10 driver 7-1 E-mail 11-1 emulation Macintosh® 12-1 Windows® 7-1 envelopes 2-7 jams original 14-3 paper 14-3 manual feed slot 2-7, 7-3 PC software settings 7-1 Res
T toner cartridge replacing 14-16, 14-17 Toner Save 4-2 transparencies 2-7 troubleshooting 14-1 difficulties with machine 14-6 copy quality 14-6 DOS setup 14-8 paper handling 14-8 printing 14-6, 14-9 scanning 14-6 software 14-7 error messages on LCD 14-1 jams 14-3 to 14-5 machine 14-1 to 14-2 V volume, setting beeper 4-1 W warranties Canada vi Notice of Disclaimer iii USA iv World Wide Web i I-3 INDEX
Brother International Corporation 100 Somerset Corporate Boulevard P.O. Box 6911 Bridgewater, NJ 08807–0911 USA Brother International Corporation (Canada) Ltd. 1 rue Hôtel de Ville, Dollard-des-Ormeaux, QC, CANADA H9B 3H6 Visit us on the World Wide Web http://www.brother.com These machines are made for use in the USA and CANADA only. We cannot recommend using them overseas because the power requirements of your Digital Copier/Printer may not be compatible with the power available in foreign countries.
