Quick Setup Guide DCP-130C Before you can use the machine, you must set up the hardware and install the software. Please read this Quick Setup Guide for the correct setup procedure and installation instructions. STEP 1 Setting Up the Machine STEP 2 Installing the Driver & Software Setup is Complete! Keep this Quick Setup Guide, the User’s Guide and the supplied CD-ROM in a convenient place for quick and easy reference at all times.
Symbols used in this guide Warning Warnings tell you what to do to prevent possible personal injury. Note Notes tell you how you should respond to a situation that may arise or give tips about how the current operation works with other features. Caution Improper Setup Improper Setup icons alert you to Cautions specify procedures you must devices and operations that are not follow or avoid to prevent possible damage to the machine or other objects. compatible with the machine.
Table of Contents Getting Started Carton components ...................................................................................................................................... 2 Control panel................................................................................................................................................ 3 STEP1 – Setting Up the Machine Removing the protective parts .....................................................................................................
Getting Started 1 Carton components Carton components may vary from one country to another. Save all packing materials and the carton in case for any reason you must ship your machine. Quick Setup Guide CD-ROM User’s Guide Power Cord Black (LC1000BK) Yellow (LC1000Y) Cyan (LC1000C) Magenta (LC1000M) Ink Cartridges A USB interface cable is not a standard accessory. Please make sure you use a USB 2.0 cable that is no longer than 2 metres long (6 feet).
Getting Started Control panel 12 10 11 2 1 9 3 8 4 1 Copy keys 7 Ink Management key 2 OK key 8 Scan key 3 Navigation keys 9 PhotoCapture key 4 Stop/Exit key 10 Menu key 5 Start keys 11 LCD (Liquid Crystal Display) 6 On/Off key 12 Warning LED 7 6 5 For the details of the control panel, see Control panel overview in Chapter 1 of the User’s Guide.
STEP1 Setting Up the Machine 1 1 1 Removing the protective parts 2 Loading paper You can load up to 100 sheets of 80 g/m2 (20 lb) paper. For details, see Acceptable paper and other media in Chapter 2 of the User’s Guide. Remove the protective tape and film covering the scanner glass. Improper Setup DO NOT connect the interface cable. Connecting the interface cable is done during the software installation process.
Setting Up the Machine 3 4 Fan the stack of paper well to avoid paper jams and misfeeds. 6 Gently put the paper into the paper tray print side down and top edge first. Check that the paper is flat in the tray. 7 5 Close the output paper tray cover. Gently adjust the paper side guides with both hands and the paper length guide to fit the paper. Make sure that the paper guides touch the edges of the paper. 8 Slowly push the paper tray completely into the machine.
STEP1 3 1 Setting Up the Machine Connecting the power cord Connect the power cord. 4 1 Choosing your language After connecting the power cord, the LCD shows: Select language q Press OK Key 2 Press OK. Press a or b to choose your language and press OK. e English q Improper Setup DO NOT connect the interface cable. Connecting the interface cable is done during the software installation process. Warning The machine must be fitted with an earthed plug.
Setting Up the Machine 5 Installing the ink cartridges 4 Take out the ink cartridge. 5 Carefully remove the protective yellow cap (1). Warning If ink gets in your eyes, wash them out with water at once, and if irritation occurs consult a doctor. 1 Make sure that the power is turned on. The LCD shows: No Cartridge 2 Open the ink cartridge cover (1). 1 1 3 Pull all the lock release levers down and remove the yellow protective part (1).
STEP1 6 Setting Up the Machine Install each ink cartridge in the direction of the arrow on the label. Take care to match the colour of the lock release lever (1) with the cartridge colour (2), as shown in the diagram below. The machine will clean the ink tube system for use for the first time. This process will occur only once, the first time ink cartridges are installed. The cleaning process will last approximately four minutes.
Setting Up the Machine 6 1 6 Print quality check Black OK? After the cleaning cycle is finished, the LCD shows: q a Yes b No Set Paper and q Color OK? Press Start 2 3 The LCD asks you if the print quality is OK for black and colour. Press a (Yes) or b (No) . q Make sure paper is loaded in the paper tray. Press Colour Start. The machine starts printing the Print Quality Check Sheet (only during initial ink cartridge installation).
STEP1 7 Setting Up the Machine Setting the LCD contrast 8 Setting the date and time You can adjust the LCD contrast for a sharper and more vivid display. If you are having difficulty seeing the LCD from your position, we recommend the following contrast setting for improved viewing. Setting the date and time allows the machine to clean the print head regularly and maintain optimum print quality. It also allows the machine to name files created when using the Scan to Card feature.
Setting Up the Machine 9 Press Stop/Exit. Note If you want to start again, press Stop/Exit to go back to Step 1. To confirm the current date and time, print out the Users Settings Report. (See “Printing reports” in Chapter 1 of the User's Guide.) Now go to Go to Supplied CD-ROM ‘MFL-Pro Suite’ on the next page to install the drivers.
Supplied CD-ROM ‘MFL-Pro Suite’ 1 Supplied CD-ROM ‘MFL-Pro Suite’ Windows® Install MFL-Pro Suite You can install the MFL-Pro Suite software and multifunction drivers. Install Other Drivers or Utilities You can install additional MFL-Pro Suite software utilities, install without PaperPort® SE, or install the printer driver only. User’s Guide View the Software User’s Guide in HTML format. The Software User’s Guide includes instructions for features available when connected to a computer. (eg.
STEP2 Installing the Driver & Software Follow the instructions on this page for your operating system and interface. For the latest drivers and documentations and to find the best solution for your problem or question, access the Brother Solutions Center directly from the driver or visit http://solutions.brother.com Windows® For USB Interface Users (For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition) .... 14 Macintosh® For USB Interface Users (For Mac OS® X 10.2.4 or greater) .....
STEP2 Installing the Driver & Software Windows® 1 Windows® USB For USB Interface Users (For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition) Important 4 The CD-ROM main menu will appear. Click Install MFL-Pro Suite. Make sure that you have finished the instructions from Step 1 Setting Up the Machine on pages 4-11. Note • Please close any applications running before installing MFL-Pro Suite. • Make sure there are no memory cards in the media drive of the machine.
Installing the Driver & Software After reading and accepting the ScanSoft® PaperPort® SE License Agreement, click Yes. 10 Using both hands, use the plastic tabs on both sides of the machine to lift the scanner cover until it locks securely into the open position. Windows® USB 5 Windows® 6 7 8 9 The installation of PaperPort ® SE will automatically start and is followed by the installation of MFL-Pro Suite.
STEP2 Installing the Driver & Software 13 Lift the scanner cover to release the lock ( Windows® USB ). Gently push the scanner cover support down ( ) and close the scanner cover ( ). 14 Turn on the machine by connecting the power cord. Windows® 16 Click Finish to restart your computer. (After restarting the computer, for Windows® 2000 Professional/XP/XP Professional x64 Edition, you must be logged on with Administrator rights.
Installing the Driver & Software Macintosh® For USB Interface Users (For Mac OS® X 10.2.4 or greater) Important 3 Macintosh® USB Make sure that you have finished the instructions from Step 1 Setting Up the Machine on pages 4-11. Carefully guide the USB cable into the trench as shown below, following the trench around and toward the back of the machine. Note For Mac OS® X 10.2.0 to 10.2.3 users, upgrade to Mac OS ® X 10.2.4 or greater. (For the latest information for Mac OS® X, visit http://solutions.
STEP2 5 6 7 Installing the Driver & Software Turn on your Macintosh ®. Macintosh® 11 Choose USB. Put the supplied CD-ROM into your CD-ROM drive. Double-click the Start Here OSX icon to install. Follow the on-screen instructions 12 Choose DCP-XXXX (where XXXX is your Macintosh® USB model name), and then click Add. Note Please wait, it will take a few seconds for the software to install. After the installation, the computer will restart automatically.
Installing the Driver & Software Macintosh® 14 To install Presto!® PageManager®, click the Note When Presto!® PageManager® is installed OCR capability is added to the Brother ControlCenter2. You can easily scan, share and organize photos Macintosh® USB Presto! PageManager icon and follow the on-screen instructions. and documents using Presto!® PageManager®. Presto!® PageManager® has been installed and the installation is now complete.
Consumables 1 Replacement consumables When the time comes to replace ink cartridges, an error message will be indicated on the LCD. For more information about the ink cartridges for your machine, visit http://solutions.brother.com or contact your local Brother re-seller.
Trademarks The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademark of Brother Industries, Ltd. Multi-Function Link is a registered trademark of Brother International Corporation. Windows and Microsoft are registered trademarks of Microsoft in the U.S. and other countries. Macintosh and True Type are registered trademarks of Apple Computer, Inc. PaperPort is a registered trademark of ScanSoft, Inc.
LP3281004 UK/IRE/SAF Printed in China
