Connection Guide

ManualsBrandsBrother ManualsCutting MachineDC200

Table Of Contents

Connection Guide

Be sure to read the "Setup Guide" before starting the connection setting.

Download the DesignNCut Manager Application

DesignNCut Manager is an application that controls your DesignNCut machine.

Please download the DesignNCut Manager application.

If you haven’t downloaded the DesignNCut Manager application please go to:

Windows OSX (Mac): http://s.brother/caqaa/

iOS (App Store): http://s.brother/caqab/

Android (Google Play): http://s.brother/caqac/

Connect your PC or mobile device to your DesignNCut

Recommended Wireless connection ...... go to page 1

Direct PC Connection with USB .............. go to page 4

* USB Cable not included, Windows only

Other Available Wireless LAN Connections:

- Using Router's WPS Button ................................... go to page 5

- Using WLAN Assistant Wizard ............................... go to page 6

* Computer's Firewall must be turned off, Windows and Mac only

- Using WLAN Assistant Wizard with USB Cable ..... go to page 7

* USB Cable not included, Windows and Mac only

Create a Free ScanNCutCanvas Account

ScanNCutCanvas is our easy to use free cloud-based editing software.

ScanNCutCanvas allows you to edit and create files at your convenience. It has

hundreds of Free Projects & Cut files with step-by-step instructions and how-to

videos. ScanNCutCanvas also allows you to upload SVG, DXF (AutoCAD files) &

FCM files to use as your cut files.

To access ScanNCutCanvas please go to:

http://ScanNCutCanvas.Brother.com

* If you have a ScanNCutCanvas account for your ScanNCut we recommend

creating a new account for DesignNCut.

For customer support please go to: http://s.brother/cpqaa/

Summary of content (10 pages)

PAGE 1
Connection Guide Be sure to read the "Setup Guide" before starting the connection setting. 1 Download the DesignNCut Manager Application DesignNCut Manager is an application that controls your DesignNCut machine. Please download the DesignNCut Manager application. If you haven’t downloaded the DesignNCut Manager application please go to: Windows OSX (Mac): http://s.brother/caqaa/ iOS (App Store): http://s.brother/caqab/ Android (Google Play): http://s.
PAGE 2
WIRELESS CONNECTION USING WIRELESS NETWORK NAME (SSID) & NETWORK PASSWORD (KEY) If you have already selected the connection method, please go to step e l : Operation performed in DesignNCut Manager connected and press Click [Start Setup]. b Click [Connect]. c Select [Wireless LAN], and then click [Next]. m * Skip this step for mobile and Mac version. Select [Use Wireless Network Name (SSID) & Network Password (Key)], and then click [Next].
PAGE 3
s Select the machine number and then click [OK]. Register on ScanNCutCanvas * For mobile version, tap [Done]. : Operation performed in DesignNCut Manager Note • To check your machine's number, press to display the [2. Machine Info] on the machine's LCD, and then press a . When [1. No.] appears on the LCD, press . Your machine's number will be displayed on the machine's LCD. t Click [ScanNCutCanvas] to access to http://ScanNCutCanvas.Brother.com to register a new account.
PAGE 4
e f When the [ScanNCut Online Settings has been completed.] dialog box appears, click [OK]. Click [Next]. * For mobile version, tap .  Click [How to Use] on the DesignNCut Manager to see tutorial for the basic usage. g Click [Close]. Note • After the settings have been completed, your machine number and your ScanNCutCanvas login ID will be shown in the DesignNCut Manager's main window.
PAGE 5
DIRECT PC CONNECTION USING USB CABLE (WINDOWS ONLY) If you have already selected the connection method, please go to step d f Press and the at the same time, once the power comes on release : Operation performed in DesignNCut Manager a Click [Start Setup]. b Click [Connect]. c Select [USB Cable], and then click [Next]. pressing down g . When the message [Machine mode?] appears on your LCD, press to select [USB]. h The message, [Turn the machine off, then on again.] will appear on your LCD.
PAGE 6
OTHER AVAILABLE WIRELESS LAN CONNECTIONS Using Router's WPS button j Press k When the message [Enable WLAN?] appears on on your DesignNCut machine. If you have already selected the connection method, please go to step e If your wireless LAN access point/router is equipped with a WPS button, locate it and proceed with the following steps: your LCD, press : Operation performed in DesignNCut Manager l a Click [Start Setup]. b Click [Connect]. c Select [Wireless LAN], and then click [Next].
PAGE 7
Using WLAN Assistant Wizard : Operation performed on the machine j If you have already selected the connection method, please go to step e k To perform this setting, your computer's firewall must be turned off. When the message [Connected to WLAN. Press [OK] button.] appears on your LCD, press button on your machine. The Wireless LAN Connect light will turn on. * Give the Wireless LAN Connect light time to turn on. : Operation performed in DesignNCut Manager a Click [Start Setup].
PAGE 8
i Using WLAN Assistant Wizard with USB Cable Plug the USB cable connector into the corresponding USB ports on the computer and on the machine. If you have already selected the connection method, please go to step e : Operation performed in DesignNCut Manager a Click [Start Setup]. b Click [Connect]. c Select [Wireless LAN], and then click [Next]. d Select [Use WLAN Assistant Wizard (USB)], and then click [Next].
PAGE 9
m The Wireless LAN Connect light will turn on. * Give the Wireless LAN Connect light time to turn on. : Operation performed in DesignNCut Manager n o Go back to your PC and then click [OK] to complete the setup. Select the machine number and then click [OK]. Note • To check your machine's number, press to display the [2. Machine Info] on the machine's LCD, and then press . When [1. No.] appears on the LCD, press . Your machine's number will be displayed on the machine's LCD.
PAGE 10
English 891-Z08 Version A