Owner's Manual

PD-9810 E-51
Chapter 7 OTHER FUNCTIONS
Copying the program
Described below is the copy procedure to transcribe the program stored in the programmer, on another
program with different program number.
1. Press [P] key to start the programmer.
2. Press the [MENU] key to display the menu screen.
3. Select <Program copy> icon with the [
] key and press the [ENTER] key.
4. Select the program number of the source and the destination for the copy with the [+/-] key and the
[
] key, then press the [ENTER] key.
5. Select [Yes] with the [ ]key and press the [ENTER] key.
The program will be copied to the destination and the screen will return to above 4. Pressing [ESC] key
or [MENU] key will switch the screen to the menu screen.
W0118Q
W0117Q
W0021Q