Owner's Manual

PD-9810 E-47
Chapter 7 OTHER FUNCTIONS
5. Select [Automatic READ / WRITE OFF] or [Automatic READ / WRITE ON] with the [ ] key and
press the [ENTER] key.
Select [Automatic READ / WRITE ON] to enable the auto read/write and select [Automatic READ /
WRITE OFF] to disable the auto read/write.
Display/non-display of the check message
Selection of the check message ([YES] and [NO]) can be performed between display and non-display.
•
Screen for [Check message ON]
•
Screen for [Check message OFF]
(NOTE) When the check message is set to [OFF], the file name change function
(Refer to “Program Writing to the File”(page E-31)) becomes inoperable.
1. Press the [P] key to start the programmer.
2. Press the [MENU] key to display the menu screen.
3. Select the <Environment setting> icon with the [
] key and press the [ENTER] key.
4. Select [Check message setting] with the [ ] key and press the [ENTER] key.
5. Select [Check message ON] or [Check message OFF] with the [ ] key and press the [ENTER]
key.
Select [Check message ON] to enable the confirmation message and select [Check message OFF] to
disable.
1603Q
1577Q
1605Q
W0019Q
1606Q
1607Q