Owner's Manual

E-46 PD-9810
Chapter 7 OTHER FUNCTIONS
Setting numbers of the program to read and write
Numbers of the program to read and write can be set to either [All programs] or [Any one program].
1. Press the [P] key to start the programmer.
2. Press the [MENU] key to display the menu screen.
3. Select the <Environment setting> icon with the [
] key and press the [ENTER] key.
4. Select [READ/WRITE program number setting] with the [ ] key and press the [ENTER] key.
5. Select either of [All programs] or [Any one program] with the [ ] key and press the [ENTER] key.
Select [All programs] to read and write all of the program and so does [Any one program] to read and
write one of any program. When set to [All programs], it takes long time to read and write because 9
programs are all read and written by one operation for reading and writing. Setting to [Any one
program] is recommended as a normal setting.
Enable/disable for auto read/write
Setting can be performed as for enable/disable for auto read/write of the program.
1. Press the [P] key to start the programmer.
2. Press the [MENU] key to display the menu screen.
3. Select the <Environment setting> icon with the [
] key and press the [ENTER] key.
4. Select [Automatic READ/WRITE setting] with the [ ] key and press the [ENTER] key.
W0019Q
1602Q
1601Q
1600Q
W0019Q