Owner's Manual

PD-9810 E-43
Chapter 7 OTHER FUNCTIONS
Initializing the Program in the Work Area
Initialization can be performed as for the program read in the work area of the programmer. (Reset to
the factory setting.) For the work area, refer to “Data saving to another machine”(page E-38).
Programmer
Initializing all of the program
1. Press the [P] key to start the programmer.
2. Press the [MENU] key to display the menu screen.
3. Select the <Initialization> icon with the [ ] key and press the [ENTER] key.
4. Select the <Initialize all of the program> icon (icon on the right) with the [ ] key and press the
[ENTER] key.
5. Select [YES] with the [ ] key and press the [ENTER] key.
When operations described above are performed, initialization has been completed as for all programs
(01 - 09) in the work area (Programs saved in file 1, 2, and 3 are not initialized.)
Initializing one of any programs
1. Press the [P] key to start the programmer.
2. Press the [MENU] key to display the menu screen.
Cycle
program
Machine File 1 File 2 File 3
Work
Environment
setting
W0018Q
W0012Q
1594Q
W0072Q
W0012Q