Owner's Manual

E-40 PD-9810

Chapter 7 OTHER FUNCTIONS

Cycle Program Setting

Cycle program setting

Setting can be performed as for continuous execution of 8 programs at maximum.

The example below exemplifies changing the cycle program from [01 (ON), 01 (ON), 05 (OFF)] to [01

(ON), 01 (ON), 01 (ON), 05 (OFF)].

1. Press the [P] key to start the programmer.

2. Press the [MENU] key to display the menu screen.

3. Select the <Cycle program> icon with the [ ] key and press the [ENTER] key.

4. Select the required cycle program with the [ ] key and press the [ENTER] key.

5. Select any one of the program No. (01 - 09) with the [+/-] key.

6. Select [05] with the [ ] key and change to [01] with the [+/-] key. Change the knife setting

below from [0FF] to [ON] with the same operation.

7. Select [-] below [C4] with the [ ] key and change to [05] with the [+/-] key. Change the knife

setting below from [ON] to [OFF] with the same operation.

If the knife setting is kept to be ON and no setting is performed for the knife at the machine, the knife

performs operation in sewing on the settings set at the programmer although settings at the machine

are prior to those at the programmer.

W0012Q

W0017Q

W0114Q

W0069Q

W0070Q

W0071Q