Owner's Manual

PD-9810 E-25
Chapter 4 PARAMETER
Changing the Parameter
Described below is the setting method for parameter No. 00 (sewing speed) from[1800rpm] to [2000
rpm] as an example.
(NOTE) The screen shown is an example when the programmer is connected to the machine with
the taper tack specifications. When the programmer is connected to the machine with the
straight bar tack specifications, a partly different screen will be displayed.
1. Select parameter No. 00 on the parameter selection screen with the [
] key and press the
[ENTER] key.
2. Select [2000rpm] with the [+/-] key and press the [ENTER] key.
W0113Q
W0112Q
W0054Q