Owner's Manual

E-24 PD-9810
Chapter 4 PARAMETER
Parameter Selection
(NOTE) The screen shown is an example when the programmer is connected to the machine with
the taper tack specifications. When the programmer is connected to the machine with the
straight bar tack specifications, a partly different screen will be displayed.
Selection with the [SHORT CUT] key
1. Press any one of the [SHORT CUT] keys on the programmer.
For further details of the [SHORT CUT] key, refer to “Name of Parts and Function”(page E-2).
Selection with the [ ] key
1. Select any one of the parameter icons with the [ ] key and press the [ENTER] key.
Selection with the [+/-] key
1. Select parameter No. with the [ ] key.
2. Select any one of the parameter No. with the [+/-] key and press the [ENTER] key.
W0051Q
W0052Q
W0053Q