Owner's Manual

E-20 PD-9810
Chapter 4 PARAMETER
No. Setting items Setting range Unit Default
15
θ2 alignment
-3
∼
310
16 Eyelet machine speed (Note 2) -600
∼
0rpm 100 0
17 Eyelet Radius
OFF、1
∼
5
1OFF
18 Taper tack Radius
OFF、1
∼
5
1OFF
19 Taper tack angle -5
∼
510
20 Slow start stitches 0
∼
3 stitches 1 0
21 Slow start speed (Note 3) 400
∼
1,500rpm 100 1,000
22 Stitch width correction -1.0
∼
1.0mm 0.1 0
(Note 2) Eyelet speed will be decided according to the speed which is set to the parameter 00
(sewing speed).
(Note 3) If the sewing speed is slower than the slow start speed, the slow start speed for
sewing will be conformed to the sewing speed.