Owner's Manual

PD-9810 E-5
Chapter 1 INTRODUCTION
Program No. selection screen
Described below is the name and function of icons that appear on the program No. selection screen.
(1) Program No.
The selected program No. is displayed. The program No. can be changed by pressing the [+/-] key.
(2) Pattern display
Displayed is the stitch pattern set to the selected program No. The pattern differs in shape from what
is actually formed because the pattern is only a simplified symbol to show the feature of stitch. 6
patterns are available as illustrated below:
(3) Sewing speed
This will display the sewing speed (parameter No. 00) set to the chosen program number.
(4) Stitch pitch
This will display the stitch pitch (parameter No. 05) of the sewing pattern set to the chosen program
number.
(5) Button hole length
This will display the button hole length (parameter No. 02) of the sewing pattern set to the chosen
program number.
(6) Taper length
This will display the taper length (parameter No. 03) of the sewing pattern set to the chosen program
number.
* When a machine with the straight bar tack specifications is connected, the straight bar tack length
(parameter No. 03) will be displayed.
(6)
(5)
(1) (3) (4)
(2)
W0105Q