Specification

30
UTILITY STITCHES
g
Attach the presser foot holder to the right
pin of zipper foot “I”.
2
1
I
1 Pin on the right side
2 Needle drop point
h
Select the straight stitch (middle (center)
needle position).
* Check the stitch number on the
machine’s body, and set the machine
for that stitch.
• When using zipper foot “I”, be sure to
select the straight stitch (middle
(center) needle position), and slowly
turn the handwheel toward you
( counterclockwise) to check that the
needle does not touch the presser foot.
If a different stitch is selected or the
needle hits the presser foot, the needle
may bend or break.
i
Topstitch around the zipper.
1
2
3
4
1 Stitching
2 Right side of fabric
3 Basting stitching
4 End of zipper opening
• When sewing, be sure that the needle
does not touch the zipper, otherwise
the needle may bend or break.
Memo
• If the presser foot contacts the zipper
slider, leave the needle lowered (in the
fabric) and raise the presser foot. After
moving the slider so it will not contact the
presser foot, lower the presser foot and
continue sewing.
j
Remove the basting stitching.
CAUTION
CAUTION