Specification

28
UTILITY STITCHES
h
Sew about 10 stitches at a slow speed.
(For models equipped with the sewing
speed controller on the machine)
Set the sewing speed controller to the left
so that the speed will be slow.
i
Use scissors to cut the upper thread and
the bobbin thread at the beginning of the
stitching.
Pull the upper thread at the end of the
stitching to the wrong side of the fabric,
and then tie it with the bobbin thread.
j
When you are finished attaching the
button, slide the feed dog position
switch, to (to the right as seen from
the rear of the machine) and turn the
handwheel to raise the feed dogs.
Memo
• The feed dogs come up when you start
sewing again.