Instruction manual

46
6 Press the stitch finger release lever to remove
the stitch finger.
7 Storage for the stitch finger is provided on the
inside of the front cover illustrated.
NOTE:
Make sure to install stitch finger when sewing regular
overlock stitches.
1 Upperlooper
2 Stitch finger
3 Stitch finger release lever
4 Front cover
5 Stitch finger holder
6 Stitch finger
B
(5) Adjust the stitch width for rolled hemming.
Move the stitch width lever (located on the left
side of the machine toward the front) up to the
“R” position.
7 Stitch width lever
8 Needle plate with stitch finger removed
A Two-needle models
B One-needle models
A
2
3
1
8
7
R
7
6
5
8
R
3.5
7
5
6
4
6 按下针迹指针释放杆以卸下针迹指针。
7 针迹指针的存放位置如图所示在前盖内。
注意：
缝制正常包缝针迹时请务必安装针迹指针。
1 上弯针
2 针迹指针
3 针迹指针释放杆
4 前盖
5 针迹指针支架
6 针迹指针
(5) 调整卷边针迹的针迹宽度。
将针迹宽度控制杆（位于缝纫机左前方）向上移
动至“R”位置。
7 针迹宽度控制杆
8 取下针迹指针的针板
A 双针型号
B 单针型号