Instruction manual

11
Operating
Powering the machine
Preparation
• Insert the three-pin plug into the socket on the
bottom right side of the machine. Insert the power
supply plug into a power outlet.
Main Power and Sewing Light Switch
This switch turns the power and sewing light on or
off. To turn on push toward “1” mark. To turn off push
toward “0” mark.
1 Main Power and Sewing Light Switch
Operation
When the pedal is pressed lightly, the machine runs
at a low speed. As the pedal is pressed further, the
machine will increase speed. When the pedal is
released, the machine stops.
2 Foot Controller
Note (For U.S.A. only):
Foot controller: Model KD-1902
This foot controller can be used on the machine with
product code 884-345. The product code is mentioned
on the machine rating plate.
1
2
操作
接通缝纫机电源
准备工作
• 将三孔插头插入缝纫机右侧底部的插座。 将电源
线插头插入电源插座。
主电源和工作照明开关
本开关可以打开或关闭主电源和缝纫灯。 将开关朝
标记“1”的方向按下时即可接通电源。 将开关朝
标记“0”的方向按下时即可断开电源。
1 主电源和工作照明开关
操作
轻踩脚踏时，缝纫机低速转动。 继续踩下脚踏时，
缝纫机将增大转速。 松开脚踏时，缝纫机停止。
2 脚踏控制器
注意（仅适用于美国）：
脚踏控制器： 型号 KD-1902
产品号为 884-345 的缝纫机可使用本脚踏控制器。
产品型号标示在缝纫机的铭牌上。