Instruction manual

-76- Chapter 4 Changing sewing data
151-390
2-2 Converting all outline data on the screen to stitch data
1. Select either [ALL], [INDV], or [SAME] on the conversion method selection menu by
clicking on the respective check box.
The check box of the item you select will turn black.
2. Click on the ALL check box on the specification method menu.
The check box will turn black.
3. Confirm the specified range is correct.
All data will be indicated in blue, and the confirmation mark will appear.
4. Confirm your selection is correct on the conversion method selection menu.
· When you select ALL on the menu, all outline data will be converted to stitch data
along with each outline's attributes, without your confirmation.
· When you select INDV or SAME on the conversion method selection menu, the
outline data you select will be converted to stitch data after you check the sewing
attributes and change them if necessary.
· When you select INDV or SAME on the conversion method selection menu, the
sewing attribute setting window will appear.
· When you click on the [SET] button, the outline data will be converted to the stitch
data.
· When you click on the [QUIT] button, the attributes for the next outline data will
appear.
· When you click on the [CANCEL] button, the operation procedure will be returned to
step 1.
· Press the [Esc] key to cancel the current operation.