user manual
Table Of Contents
- USER’S GUIDE
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Paper
- 3 On-Screen Programming
- 4 Initial Setup
- Getting started
- Setting the Date and Time
- Turning on Automatic Daylight Savings Time
- Setting the Station ID
- Setting the Beeper Volume
- Setting the Speaker Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Setting the Ring Volume
- Setting Tone and Pulse dialing mode (Canada Only)
- Setting up your area code (USA only)
- Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Important information
- 12 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access Card
Troubleshooting and routine maintenance
12 - 8
Routine maintenance
Cleaning the print head
Clean the print head when you want to improve the print quality and
also as part of your routine maintenance.
1
Before you clean inside the fax machine, unplug the
telephone line cord first, and then the power cord from the AC
power outlet.
2
Open the top cover by lifting the lever on the right side of the
top cover.
3
Take out the print cartridge.
4
To clean your fax machine’s print head, wipe the print head
with a lint-free cloth that is dry or lightly moistened with
isopropyl alcohol.
5
Wait until the alcohol on the print head is completely dry.
6
Install the print cartridge. (See Changing the ribbon on page
12-9.)
7
Close the top cover. Press down on both sides of the top
cover until it clicks.
8
Plug in the telephone line cord back in first and then plug the
power cord back into the AC power outlet.
After you have just used the fax machine, some internal parts
of the fax machine are extremely HOT! So please be careful.