user manual
Table Of Contents
- USER’S GUIDE
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Paper
- 3 On-Screen Programming
- 4 Initial Setup
- Getting started
- Setting the Date and Time
- Turning on Automatic Daylight Savings Time
- Setting the Station ID
- Setting the Beeper Volume
- Setting the Speaker Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Setting the Ring Volume
- Setting Tone and Pulse dialing mode (Canada Only)
- Setting up your area code (USA only)
- Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Important information
- 12 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access Card
Troubleshooting and routine maintenance
12 - 4
Compatibility
If you are having difficulty sending or receiving a fax due to
possible interference on the phone line, we recommend that you
try setting the compatibility to BASIC.
1
Press Menu/Set, 0, 1.
2
Press ▲ or ▼ to select BASIC
(or NORMAL).
Press Menu/Set.
3
Press Stop/Exit.
Document Jam or Paper Jam
Document Jam
The documents were not inserted or fed properly, or were too long.
1
Remove any paper from ADF that is not jammed.
2
Open the top cover by lifting the lever on the right side of the
top cover.
3
Pull the document toward the front of your fax machine.
4
Close the top cover. Press down on both sides of the top
cover until it clicks.
1.COMPATIBILITY
Top Cover
Document is jammed.