user manual
Table Of Contents
- USER’S GUIDE
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Paper
- 3 On-Screen Programming
- 4 Initial Setup
- Getting started
- Setting the Date and Time
- Turning on Automatic Daylight Savings Time
- Setting the Station ID
- Setting the Beeper Volume
- Setting the Speaker Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Setting the Ring Volume
- Setting Tone and Pulse dialing mode (Canada Only)
- Setting up your area code (USA only)
- Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Important information
- 12 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access Card
9 - 2
Printing reports
Printing reports
Following reports are available:
How to print a report
1
Make sure that there is no document in the ADF.
2
Press Copy/Reports, then enter the number (see list above)
of the report you want to print. For example, press 6 to print
the USER SETTINGS.
Prints a Transmission Verification
Reports for the last fax that was sent.
This information will remain until you
pick up the handset.
Prints the Help List so you can see
at-a-glance how to quickly program your
fax machine.
Lists names and numbers stored in
One-Touch and Speed-Dial memory, in
numerical order.
Lists information about the last incoming
and outgoing faxes. (TX means
Transmit.) (RX means Receive.)
Quick-Dial list (above), alphabetically.
Lists your settings.
Lists summary information and amount
of occupied memory.
1.TRANSMISSION
2.HELP LIST
3.QUICK-DIAL
4.FAX JOURNAL
5.TEL.INDEX
6.USER SETTINGS
7.MEMORY STATUS