user manual
Table Of Contents
- USER’S GUIDE
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Paper
- 3 On-Screen Programming
- 4 Initial Setup
- Getting started
- Setting the Date and Time
- Turning on Automatic Daylight Savings Time
- Setting the Station ID
- Setting the Beeper Volume
- Setting the Speaker Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Setting the Ring Volume
- Setting Tone and Pulse dialing mode (Canada Only)
- Setting up your area code (USA only)
- Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Important information
- 12 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access Card
8 - 2
Remote Fax Options
Programming your pager number
When Paging is selected, your fax machine dials the pager number
you’ve programmed, and then dials your Personal Identification
Number (PIN). This activates your pager so you will know that you
have a fax message in the memory.
1
Press Menu/Set, 8, 1.
2
Press ▲ or ▼ to select
PAGING.
3
Enter your pager phone number followed by # # (up to 20
digits).
Press Menu/Set.
4
Do not include the area code if it is the same as that of your
fax machine.
For example, press 1 8 0 0 5 5 5 1 2 3 4 # #.
5
If your pager needs a PIN, enter the PIN, press #, press
Redial/Pause, enter your fax number followed by # #.
Press Menu/Set.
(For example, press 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 5 5 1
2 1 2 # #)
—OR—
If you do not need a PIN, press Redial/Pause, enter your fax
number followed by # #.
Press Menu/Set.
(For example, press Redial/Pause 1 8 0 0 5 5 5 1 2 1 2 # #)
6
Press Stop/Exit.
You cannot change a Paging number or PIN remotely. If you
have set Paging, a backup copy will automatically be printed
at the fax machine.
1.FWD/PAGE/STORE