user manual
Table Of Contents
- USER’S GUIDE
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Paper
- 3 On-Screen Programming
- 4 Initial Setup
- Getting started
- Setting the Date and Time
- Turning on Automatic Daylight Savings Time
- Setting the Station ID
- Setting the Beeper Volume
- Setting the Speaker Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Setting the Ring Volume
- Setting Tone and Pulse dialing mode (Canada Only)
- Setting up your area code (USA only)
- Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Important information
- 12 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access Card
5 - 13
Setup Receive
Call Waiting/Caller ID
The Call Waiting/Caller ID feature lets you use the Call
Waiting/Caller ID subscriber service offered by many local
telephone companies. This feature displays the telephone number
(or name, if available) of Call Waiting Callers on your machine’s
LCD.
1
Press Menu/Set, 0, 3.
2
Press ▲ or ▼ to select ON (or
OFF).
Press Menu/Set.
To answer a Call Waiting signal:
3
To answer a Call Waiting signal while you’re talking on the
phone, ask the other party if you can put them on Hold to
catch the other call. The LCD shows the Caller ID.
4
Press Search/Speed Dial to switch to the second call.
5
To switch back to the first call, press Search/Speed Dial
again.
Either caller can hang up at any time. However, if you hang up
you will disconnect both callers.
3.CALLWAITING ID