user manual
Table Of Contents
- USER’S GUIDE
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Paper
- 3 On-Screen Programming
- 4 Initial Setup
- Getting started
- Setting the Date and Time
- Turning on Automatic Daylight Savings Time
- Setting the Station ID
- Setting the Beeper Volume
- Setting the Speaker Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Setting the Ring Volume
- Setting Tone and Pulse dialing mode (Canada Only)
- Setting up your area code (USA only)
- Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Important information
- 12 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access Card
5 - 7
Setup Receive
Setting up Sequential Polling Receive
The fax machine can ask for faxes from several fax units in a single
operation (Sequential Polling Receive). Afterwards, a Sequential
Polling Report will be printed.
1
Press Menu/Set, 2, 7.
2
Enter the fax machines you
want to poll using One-Touch, Speed-Dial, a Group, or
Search. For example, for One-Touch 3 and Speed-Dial
location 09, press One-Touch dial key 3, Search/Speed Dial,
# and 09.
3
Press Fax Start. The fax machine will poll each number or
Group number in turn to receive a fax.
Press Stop/Exit while the machine is dialing to cancel the
polling process.
To cancel all sequential polling receive jobs, press Menu/Set,
4. (See Canceling a scheduled job on page 6-5.)
7.POLLING RX