user manual

Setup Receive
5 - 6
Changing the remote codes
Remote Codes might not work with some telephone systems. The
preset Fax Receive Code is 5 1. The preset Telephone Answer
Code is # 5 1.
1
Press Menu/Set, 2, 4.
2
Press ▲ or ▼ to select ON (or
OFF).
Press Menu/Set.
3
Enter the new Fax Receive Code.
Press Menu/Set.
4
Enter the new Telephone Answer Code.
Press Menu/Set.
5
Press Stop/Exit.
Printing a fax from the memory
If you have selected Fax Forwarding, Paging or Fax Storage
(Menu/Set, 8, 1) you can still print a fax from the memory when you
are at the fax machine. (See Setting Fax Storage on page 8-3.)
1
Press Menu/Set, 8, 3.
2
Press Fax Start.
3
After printing has finished, press Stop/Exit.
Polling
Polling is the process of retrieving faxes from another fax machine.
You can use the fax machine to ‘poll’ other machines, or you can
have someone poll the fax machine.
Everyone who is involved in Polling needs to set up their fax
machines for Polling. When someone polls the fax machine to
receive a fax, they pay for the call. If you poll someone’s fax
machine to receive a fax, you pay for the call.
Setting up Polling Receive
Polling Receive is when you call another fax machine to receive a
fax from it.
1
Press Menu/Set, 2, 7.
2
Enter the fax number you are
polling.
3
Press Fax Start.
The LCD shows DIALING.
If you are always disconnected when accessing your external
TAD remotely, try changing the Fax Receive Code,
Telephone Answer Code, or Activation Voice Code to other
three-digit codes using numbers 0-9, or #.
Some fax machines do not respond to the Polling feature.
4.REMOTE CODE
3.PRINT FAX
7.POLLING RX