user manual
Table Of Contents
- USER’S GUIDE
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Paper
- 3 On-Screen Programming
- 4 Initial Setup
- Getting started
- Setting the Date and Time
- Turning on Automatic Daylight Savings Time
- Setting the Station ID
- Setting the Beeper Volume
- Setting the Speaker Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Setting the Ring Volume
- Setting Tone and Pulse dialing mode (Canada Only)
- Setting up your area code (USA only)
- Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Important information
- 12 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access Card
3 - 5
On-Screen Programming
Main
Menu
Menu
Selections
Options Descriptions Page
3.SETUP SEND
(Continued)
7.DELAYED
FAX
— Set the time of day in 24
hour format that the
delayed faxes will be
sent.
6-10
8.POLLED TX ON
OFF
Set up your fax machine
with a document to be
retrieved by another fax
machine.
6-11
9.MEMORY TX
NEXT FAX ONLY
ON
OFF
You can send faxes from
memory
.
6-12
4.CANCEL JOB
— — Cancel a delayed fax or
polling job.
6-5
5.INTERRUPT
— — Send a fax now, even if
you have your fax
machine set to send a fax
later, or if you have it set
for Polling.
6-13
6.SET QUICK-DIAL
1.ONE-TOUCH
DIAL
— Stores One-Touch Dial
numbers, so you can dial
by pressing one key.
7-1
2.
SPEED-DIAL
— Stores Speed-Dial
numbers, so you can dial
by pressing only a few
keys.
7-2
3.SETUP
GROUPS
— Sets up a Group number
for Broadcasting.
7-4
7.SETUP REPORTS
1.
TRANSMISSION
ON
OFF
Initial setup for
Transmission Verification
Report and Fax Journal
period.
9-1
2.JOURNAL
PERIOD
EVERY 30 FAXES
EVERY 6 HOURS
EVERY 12 HOURS
EVERY 24 HOURS
EVERY 2 DAYS
EVERY 7 DAYS
OFF
9-1
The factory setting (option) is shown in bold.
Press the Menu numbers.
(ex. Press 1, 1 for Date/Time)
—OR—
to accept
to
exit
to select to select










