user manual
Table Of Contents
- USER’S GUIDE
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Paper
- 3 On-Screen Programming
- 4 Initial Setup
- Getting started
- Setting the Date and Time
- Turning on Automatic Daylight Savings Time
- Setting the Station ID
- Setting the Beeper Volume
- Setting the Speaker Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Setting the Ring Volume
- Setting Tone and Pulse dialing mode (Canada Only)
- Setting up your area code (USA only)
- Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Important information
- 12 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access Card
Introduction
1 - 3
Part names
■ Front view
■ Back view
No. Name Description
1 Telephone Line Cord Connect the fax machine to a telephone
wall jack.
2 Telephone Handset Use when receiving or making voice
calls.
3 Handset Curled Cord Use to connect the handset to the fax
machine.
4 Document Support Supports the document in the ADF.
5 Paper Wire Extension Supports the paper in the paper tray.
6 Paper Tray Load paper here.
7 Paper Guides Press and slide to fit the document width.
8 Control Panel Use the keys and display to control the
fax machine.
9 Cover Open Lever To open the top cover, lift this lever.
No. Name Description
10 External Telephone Line
Jack (EXT.)
Plug in the telephone line of an external
telephone or TAD here.
11 Telephone Line Jack
(LINE)
Plug in the telephone line here.
8 Control Panel
2 Telephone Handset
3 Handset Curled
Cord
5 Paper Wire
Extension
6 Paper Tray
7 Paper Guides
1 Telephone
Line Cord
9 Cover Open
Lever
4 Document
Support
11 Telephone
Line Jack
10 External
Telephone Line
Jack