user manual

Chapter 3
10
Setting your changes as the
new default 3
You can store the fax options you use
frequently for Fax Resolution,
Contrast, Glass ScanSize and
Real Time TX by saving them as the
default settings. These settings will stay until
you change them again.
a Press (FAX).
b Press a or b to choose the setting you
want to change, and press OK. Then
press a or b to choose your new option.
Press OK.
Repeat this step for each setting you
want to change.
c After changing the last setting, press
a or b to choose Set New Default.
Press OK.
d Press 1 to choose Yes.
e Press Stop/Exit.
Restoring fax options to the
factory settings 3
You can restore all the fax options you have
changed back to the factory settings. These
settings will stay until you change them again.
a Press (FAX).
b Press a or b to choose
Factory Reset.
Press OK.
c Press 1 to choose Yes.
d Press Stop/Exit.
Additional sending
operations
3
Sending a fax manually 3
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
NOTE
To send a multi-page fax, use the ADF.
a Load your document.
b Press (FAX).
c To listen for a dial tone, press Hook.
d Dial the fax number.
e When you hear the fax tones, press
Black Start or Color Start.
If you are using the scanner glass, press
1 to send the fax.
Sending a fax at the end of a
conversation 3
At the end of a conversation, you can send a
fax to the other party before you both hang
up.
a Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b Load your document.
c Press (FAX).
d Press Black Start or Color Start.
 If you are using the scanner glass,
press 1 to send a fax.
e Replace the handset of the external
phone.