user manual
Table Of Contents
- Advanced User’s Guide MFC-J450DW MFC-J470DW MFC-J475DW DCP-J152W
- User's Guides and where do I find them?
- Table of Contents
- 1 General setup
- 2 Security features (MFC models)
- 3 Sending a fax (MFC models)
- 4 Receiving a fax (MFC models)
- 5 Dialing and storing numbers (MFC models)
- 6 Printing reports
- 7 Making copies
- Copy options
- Stop copying
- Improving copy quality
- Enlarging or reducing copies
- Making N in 1 copies or a poster (Page Layout)
- 2 in 1 ID copy (Page Layout)
- Sorting copies
- Adjusting Density
- Remove Background Color
- 2-sided copying (MFC models)
- Setting your changes as the new default
- Restoring all settings to the factory settings
- Copy options
- A Routine maintenance
- B Glossary
- Index
- brother USA/CAN
6
2
TX Lock 2
TX Lock lets you prevent unauthorized
access to the machine.
While TX Lock is On, the following operations
are available:
Receiving faxes
PC-Fax Receive
1
(If PC-Fax Receive was already On)
1
While the TX Lock feature is turned on, your machine
will receive faxes and store them in its memory.
Then, when TX Lock is turned off, the faxes will be
sent to your chosen PC.
While TX Lock is On, the following operations
are NOT available:
Operation from the control panel
PC printing
NOTE
If you forget the TX Lock password, call
Brother Customer Service. (See Basic
User’s Guide: Brother numbers.)
Setting and changing the
TX Lock password 2
NOTE
If you have already set the password, you
will not need to set it again.
Setting the password 2
Make a careful note of your password.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Miscellaneous.
Press OK.
d Press a or b to choose TX Lock.
Press OK.
e Enter a four-digit number for the
password.
Press OK.
f When the LCD shows Verify: re-enter
the password.
Press OK.
g Press Stop/Exit.
Security features
(MFC models)
2