Quick Setup Guide

13
For Wireless Network Users (ADS-2500We only)
Wireless Network
6
Setup using the
DVD-ROM and USB cable
(Windows
®
and Macintosh)
For Windows
®
Users:
a Put the DVD-ROM into your DVD-ROM drive. If
the model name screen appears, choose your
machine. If the language screen appears,
choose your language.
b Click Install MFL-Pro Suite and click Yes if
you accept the license agreements.
c Choose Wireless Network Connection, and
then click Next.
d When the Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended) and click Next.
e Follow the on-screen instructions to set up the
Brother machine.
f Your machine will now try to connect to your
wireless network. It may take a few minutes.
Wireless setup is now complete.
The Wi-Fi light on the Control Panel
lights up, indicating that the machine’s
Network I/F is set to WLAN.
To install MFL-Pro Suite
For Windows
®
users:
Now go to
Step g on page 14
For Macintosh users:
Now go to
Step g on page 15
For Macintosh Users:
For Macintosh installation, download the full
driver and software package from the
Brother Solutions Center
(http://support.brother.com/
). After
downloading the file on your Macintosh,
double-click “Start Here OSX”. Select
“Wireless” installation and follow the
“Wireless Device Setup” instructions on your
computer screen. When setup is complete, go
to step g on page 15.
NOTE
• If the Brother screen does not appear
automatically, go to Computer
(My Computer).
(For Windows
®
8: click the (File Explorer)
icon on the taskbar, and then go to Computer.)
• Double-click the DVD-ROM icon, and then
double-click start.exe.
NOTE
• For Windows Vista
®
, Windows
®
7 and
Windows
®
8, when the User Account Control
screen appears, click Allow or Yes.
• Click Yes if you accept the license agreements.