User Guide
Table Of Contents
- ADS-4100/ADS-4300N/ADS-4500W/ADS-4700W/ADS-4900W
- Quick Setup Guide
- Product Safety Guide
- Symbols and conventions used in this guide
- Compilation and Publication Notice
- Choose a safe location for the unit
- General precautions
- Connecting the unit safely
- Servicing the unit
- Product Warranty & Liability
- Declaration of Conformity (Europe and Turkey only)
- UK Declaration of Conformity for Radio Equipment Regulation 2017 (Great Britain only) (Applicable to Models with Radio Interfaces)
- EU Declaration of Conformity for RE Directive 2014/53/EU (Europe and Turkey only) (Applicable to Models with Radio Interfaces)
- Wireless LAN (Models with the wireless LAN function only)
- LAN connection (Models with wired LAN function only)
- Information for compliance with Commission Regulation 801/2013
- Wireless LAN Enable/Disable (ADS-4500W/ADS-4700W/ADS-4900W only)
- Recycling information in accordance with the WEEE and Battery Directives
- WEEE ve Pil Direktifleriyle uyumlu geri dönüşüm bilgileri
- Türkiye RoHS Uygunluk Bildirisi
- Trademarks
- Brother customer service
- Unlawful use of scanning equipment
- Disclaimer
2
Manual Wireless Setup (ADS-4500W/ADS-4700W/ADS-4900W only)
If you do not have a computer connected to the network or if you cannot connect your machine using your computer, try to set up the
connection manually.
1. Press
> [Find Wi-Fi
Network] > [Yes].
2. Select the SSID (Network
Name).
Enter the Network key
(Password).
When the wireless setup is
successful, the LCD displays
[Connected].
If you cannot nd your SSID or
Network key, ask your network
administrator or wireless access
point/router manufacturer.
NOTE
• If setup is not successful, restart your machine
and the wireless access point/router, and then
repeat these steps.
• If using a computer, go back to
A
to install
software.
Using your machine with your computer or mobile device
A
Visit setup.brother.com to download and
install Brother software.
Follow the on-screen
instructions to continue
installation.
Finish
setup.brother.com
When nished, restart your computer.
• To check for the latest rmware, visit
support.brother.com/up7.
• If not successful, try to set up the
connection manually.
For detailed scanning instructions,
see the Online User’s Guide at
support.brother.com/manuals.
For Mac: Visit support.brother.com/mac to
download Brother software.
LED Indications (ADS-4100/ADS-4300N only)
Connect your machine and install software
Select your preferred scanning method and choose your connection method.
4
Using your machine as a standalone device (ADS-4300N/ADS-4500W/ADS-4700W/
ADS-4900W only)
B
Connect your machine to your network using a network cable (purchased separately) or via Wi-Fi
®
.
You can set up your Wi-Fi connection either using the machine's control panel or using your computer.
If setup is not successful, visit support.brother.com for FAQs, Troubleshooting, and manuals.
NOTE
Off
Lit
Blinking
Machine Status
Ready
(Blinking slowly)
Sleep
Error Status
• Document Jam
• Document Pick Up Error
• Front Cover Open
• Multifeed Detection Error
(ADS-4300N only)
• Access Error
• Scheduled Maintenance
Notication
• Pick Up Roller
Replacement Notication
For more information about troubleshooting your machine, see the Online User’s Guide.
For Mobile Devices:
• Set up the connection
manually.
• You can also connect
to your machine if it is
connected to your router/
access point using a
network cable (purchased
separately). For more
information, see the Online
User's Guide.