User`s guide

OPTIONS 4 - 1
4
This printer has the following optional accessories. You can increase the capabilities of the printer with
these items. Click the symbol L in the table to see the information for each item.
DIMM
We recommend that you expand the printer memory to avoid any memory full errors.
For HL-5040
This printer has 8 MB of standard memory and a slot for optional additional memory. The memory can
be expanded up to a total of 136MB by installing a commercially available DIMM (Dual In-line Memory
Module).
For HL-5050 and HL-5070N
These printers have 16 MB of standard memory and a slot for optional additional memory. The memory
can be expanded up to a total of 144 MB by installing a commercially available DIMM (Dual In-line
Memory Module).
The following DIMM size can be installed:
In general, DIMM must have the following specifications:
Options
Model DIMM Lower tray unit Print server
HL-5030 N/A N/A N/A
HL-5040 LLL
HL-5050 LLL
HL-5070N LLStandard
■ 16 Mbyte
■ 32 Mbyte
■ 64 Mbyte
■ 128 Mbyte
TECHWORKS
TECHWORKS
TECHWORKS
TECHWORKS
12456-0001
12457-0001
12458-0001
12459-0001
For more information, visit Techworks web site at www.techworks.com
Type
CAS Latency
Clock Frequency
Capacity
Height
Parity
DRAM Type
100 pin and 32 bit output
2 or 3
66MHz or more
16, 32, 64 Mbyte or 128 Mbyte
35 mm (1.4 inches) or less
NONE
SDRAM 4 Bank
■ Additional memory is useful and may be necessary if you are using the Page Protection function.
(For HL-5070N)
■ You have to expand the printer memory by adding a DIMM to use the FTP/IPP protocol.