User`s guide
Table Of Contents
- Definitions of warnings, cautions, and notes
- To use the printer safely
- Brother Numbers (USA and Canada)
- Frequently asked questions (FAQs)
- Important information: Regulations
- Federal Communications Commission (FCC) Declaration of Conformity (For USA)
- Industry Canada Compliance Statement (For Canada)
- Radio interference (220 to 240 volt model only)
- International ENERGY STAR® Compliance Statement
- Laser Safety (100 to 120 volt model only)
- FDA Regulations (100 to 120 volt model only)
- IEC 60825 specification (220 to 240 volt model only)
- IMPORTANT - For Your Safety
- Trademarks
- Table of Contents
- About this printer
- Driver and software
- Control panel
- Options
- Routine maintenance
- Troubleshooting
- Appendix
- INDEX
3 - 4 CONTROL PANEL
Figure 3-10
Paper jam
Clear the paper jam. See Paper jams and how to clear them in Chapter 6. If the
printer does not start printing, press the Go button.
No paper
Put paper in the printer. See Printing on plain paper in Chapter 1. Then press the
Go button.
Misfeed
Put the paper back in properly, and then press the Go button. The printer will
start printing again.
Figure 3-11
Cover open
LED
Printer status
Toner
Drum
Paper
Status
Toner
Drum
Paper
Status