User`s guide
Table Of Contents
- Definitions of warnings, cautions, and notes
- To use the printer safely
- Brother Numbers (USA and Canada)
- Frequently asked questions (FAQs)
- Important information: Regulations
- Federal Communications Commission (FCC) Declaration of Conformity (For USA)
- Industry Canada Compliance Statement (For Canada)
- Radio interference (220 to 240 volt model only)
- International ENERGY STAR® Compliance Statement
- Laser Safety (100 to 120 volt model only)
- FDA Regulations (100 to 120 volt model only)
- IEC 60825 specification (220 to 240 volt model only)
- IMPORTANT - For Your Safety
- Trademarks
- Table of Contents
- About this printer
- Driver and software
- Control panel
- Options
- Routine maintenance
- Troubleshooting
- Appendix
- INDEX
CONTROL PANEL 3 - 3
Figure 3-6
Data remaining in memory
Print data remains in the printer memory. If the Status LED is on for a long time
and nothing has printed, press the Go button to print the remaining data.
Figure 3-7
Toner low
Indicates that the toner cartridge is nearly empty. Purchase a new toner
cartridge and have it ready for when Toner Empty is indicated.
The Toner LED alternates turning on for 2 seconds and off for 3 seconds.
Figure 3-8
Toner empty
Replace the toner cartridge with a new one. See Replacing the toner cartridge
in Chapter 5.
Figure 3-9
Drum unit near end of life
The drum unit is near the end of its life. We recommend that you obtain a new
drum unit to replace the current one. See Replacing the drum unit in Chapter 5.
The Drum LED alternates turning on for 2 seconds and off for 3 seconds.
LED
Printer status
Toner
Drum
Paper
Status
Toner
Drum
Paper
Status
Toner
Drum
Paper
Status
Toner
Drum
Paper
Status