User`s guide
Table Of Contents
- Definitions of warnings, cautions, and notes
- To use the printer safely
- Brother Numbers (USA and Canada)
- Frequently asked questions (FAQs)
- Important information: Regulations
- Federal Communications Commission (FCC) Declaration of Conformity (For USA)
- Industry Canada Compliance Statement (For Canada)
- Radio interference (220 to 240 volt model only)
- International ENERGY STAR® Compliance Statement
- Laser Safety (100 to 120 volt model only)
- FDA Regulations (100 to 120 volt model only)
- IEC 60825 specification (220 to 240 volt model only)
- IMPORTANT - For Your Safety
- Trademarks
- Table of Contents
- About this printer
- Driver and software
- Control panel
- Options
- Routine maintenance
- Troubleshooting
- Appendix
- INDEX
DRIVER AND SOFTWARE 2 - 8
Accessories tab
When you install the optional lower tray unit, you can add it and select its settings in the Accessories
tab as follows.
1
You can manually add and remove the options for any optional unit device that is installed on the
printer. Tray settings will match the installed options.
2
Paper Source Setting
This feature recognizes the paper size in each paper tray.
3
Auto detection of printer options (For HL-5040, HL-5050 and HL-5070N)
The Auto Detect function finds the currently installed optional unit devices and show the available
settings in the printer driver. When you click the Auto Detect button, options that are installed on
the printer will be listed. You can manually add or remove options.
Auto Detect function is not available under certain printer coditions.
1
2
3