User`s guide
Table Of Contents
- Definitions of warnings, cautions, and notes
- To use the printer safely
- Brother Numbers (USA and Canada)
- Frequently asked questions (FAQs)
- Important information: Regulations
- Federal Communications Commission (FCC) Declaration of Conformity (For USA)
- Industry Canada Compliance Statement (For Canada)
- Radio interference (220 to 240 volt model only)
- International ENERGY STAR® Compliance Statement
- Laser Safety (100 to 120 volt model only)
- FDA Regulations (100 to 120 volt model only)
- IEC 60825 specification (220 to 240 volt model only)
- IMPORTANT - For Your Safety
- Trademarks
- Table of Contents
- About this printer
- Driver and software
- Control panel
- Options
- Routine maintenance
- Troubleshooting
- Appendix
- INDEX
2 - 7 DRIVER AND SOFTWARE
Page Protection
‘Page Protection’ refers to a setting that reserves additional memory for the creation of full page images.
Selections are AUTO, OFF, LTR (Letter-size paper), A4 or LGL (legal-size-paper).
The page protection feature allows the printer to create the full page image to be printed in memory
before physically moving the paper through the printer. When the image is very complicated and the
printer has to wait to process the image before printing, use this function.
Print Date & Time
Date: Specifies the format of the date.
Time: Specifies the format of the time.
HRC
This option allows you to change the HRC setting on your Brother HL-5000 series printer. HRC is a
special function that offers improved print quality of characters and graphics that conventional laser
printers cannot attain with resolutions of 300 or 600 dpi.
■ Printer Default: The setting will match that of the printer.
■ Light
■ Medium
■ Dark.
■ Off: Turn HRC off
TrueType Mode (For HL-5040, HL-5050 and HL-5070N)
TrueType fonts may be sent to your printer in one of the following ways:
■ Download as TrueType (For HL-5050 and HL-5070N)
■ Download as Bit Image
■ Print as Graphics