User`s guide
Table Of Contents
- Definitions of warnings, cautions, and notes
- To use the printer safely
- Brother Numbers (USA and Canada)
- Frequently asked questions (FAQs)
- Important information: Regulations
- Federal Communications Commission (FCC) Declaration of Conformity (For USA)
- Industry Canada Compliance Statement (For Canada)
- Radio interference (220 to 240 volt model only)
- International ENERGY STAR® Compliance Statement
- Laser Safety (100 to 120 volt model only)
- FDA Regulations (100 to 120 volt model only)
- IEC 60825 specification (220 to 240 volt model only)
- IMPORTANT - For Your Safety
- Trademarks
- Table of Contents
- About this printer
- Driver and software
- Control panel
- Options
- Routine maintenance
- Troubleshooting
- Appendix
- INDEX
1 - 18 ABOUT THIS PRINTER
3
Send the print data to the printer.
4
Open the manual feed tray. Slide the paper guides to fit the paper size.
Figure 1-19
5
Using both hands put the paper in the manual feed tray until the front edge of the paper touches the
paper feed roller. Hold the paper in this position until the printer automatically feeds the paper in for
a short distance, and then let go of the paper.
Figure 1-20
A NO PAPER status is shown by the control panel LEDs until you put a sheet of paper in the manual
feed tray.
Figure 1-18
Toner
Drum
Paper
Status