User`s guide
Table Of Contents
- Definitions of warnings, cautions, and notes
- To use the printer safely
- Brother Numbers (USA and Canada)
- Frequently asked questions (FAQs)
- Important information: Regulations
- Federal Communications Commission (FCC) Declaration of Conformity (For USA)
- Industry Canada Compliance Statement (For Canada)
- Radio interference (220 to 240 volt model only)
- International ENERGY STAR® Compliance Statement
- Laser Safety (100 to 120 volt model only)
- FDA Regulations (100 to 120 volt model only)
- IEC 60825 specification (220 to 240 volt model only)
- IMPORTANT - For Your Safety
- Trademarks
- Table of Contents
- About this printer
- Driver and software
- Control panel
- Options
- Routine maintenance
- Troubleshooting
- Appendix
- INDEX
ROUTINE MAINTENANCE 5 - 12
Cleaning
Clean the outside and inside of the printer regularly with a dry soft cloth. When you replace the toner
cartridge or the drum unit, make sure you clean the inside of the printer. If printed pages are stained with
toner, clean the inside of the printer with a dry soft cloth.
See the Maintenance Tutorial section in the supplied CD-ROM. You can see instructional videos on
your computer screen, showing you how to perform these tasks.
1
You can see how to clean the scanner window.
2
You can see how to clean the corona wire in the drum unit.
2
1