Service manual

HL-5030/5040/5050/5070N SERVICE MANUAL
4-57
(18) Disconnect the connector from the front cover sensor.
(19) Remove the bind B M3x10 Taptite screw.
(20) Remove the toner LED PCB unit ASSY.
(21) Remove the sensor clip.
(22) Remove the front cover sensor from the main frame L.
Fig. 4-99
(23) Remove the develop joint and joint spring from the main frame L.
(24) Remove the gear 40/54Y, gear 17 planetary, gear 45 arm F/R, and gear 20 center F/R
from the main frame L.
Fig.4-99b
Taptite, bind B M3x10
Toner LED PCB
unit ASSY
Sensor clip
Front cover sensor
Sensor clip
Main frame L
Front cover sensor
Connector
Develop joint
Joint spring
Gear 40/54Y
Gear 17
planetary
Gear 45
arm F/R
Gear 20
center F/R