Service manual

II-5
2.3 Removing the Paper Tray Protective Materials
Two spacers are installed in the paper tray to protect it from shock and vibrations during
shipping. Remove the spacers before using the printer. Follow the procedure below to
remove the spacers from the paper tray.
Note:
Keep the spacers in case you need to transport the printer over long distances in the
future.
Fig.2-9
1) Gently pull out the paper tray until it stops.
Fig.2-10
2) Hold the tray with both hands, lift the front up slightly and pull it completely out of the
printer.
Note:
Place the tray on a flat surface.
Fig.2-11