Service manual

II-1
CHAPTER II INSTALLATION
1. TRANSPORTING THE PRINTER
Note the following points when transporting the printer into position.
At least two people should carry the printer.
Note:
Because the printer weighs 34.9kg with the tray and consumables installed, at least two
people should carry it.
To lift the printer, face the front and back of the printer and grip the recessed areas at the
bottom left and right with both hands. Never try to lift the printer by gripping any other
areas. Lifting the printer by gripping other areas can cause the printer to fall, resulting in
injury.
Bend your knees when lifting the printer to avoid back injury.
Never try to lift the printer by gripping the tray cover which protrudes at the lower back of
the printer. It may cause the tray cover to be damaged.
Fig.2-1
Recess
Fig.2-2
Keep the printer level.
Note:
When carrying the printer, keep it level to prevent trays and consumables from falling
out.
Do not tilt it more than 10 degrees in any direction.