Service manual

V-90
<Whole image has bluish tinge>
Fig.5-32
Condition:
Whole image has bluish tinge.
Initial check:
Parts of different specifications, improper installation, damage, deformation, dirt, foreign
substance attached, etc.
Major parts to be checked:
Transfer roll cartridge ASSY
Item Check Remedy
1
Paper check
The recommended size/type of paper is used?
Change paper.
Use the recommended
size/type of paper.
Check the printer driver.
2
The flakes appear on the recommended size/type
of paper.
Or the flakes appear on the paper other than
recommended size/type of paper.
Adjust transfer roll
cartridge tertiary
transfer current value
(Refer to Trouble
shooting 6. adjusting
transfer roll cartridge
tertiary transfer current
value in Chapter 5).